Search results

  1. chacal231077

    Toshiba PD1843 15khz dim image/low brightness

    Hi! :) its compatible this one ? BR24L01AF-WE2 BR24L01AF-WE2 L01A Aliexpress
  2. chacal231077

    Dead or Alive ++ Tecmo TPS ZN Mask Rom cross reference

    Hi! :) I received the chips, I chose a +5v to 3.3v regulator for the new new chip which works at 3.3v :) LDO Voltage Regulators Tell me if this is correct or if you have a better suggestion in terms of case size, smaller or another component that will work :thumbup:
  3. chacal231077

    CPS2 Black Marvel vs Capcom may be corrupted, infinity key or the CPS2 Suicide Free Modchip not working

    Hi! :) I'm relaunching this post hoping that someone on this forum will help me. I am already in contact with a member of the Arcade Otaku forum, who helped me a lot, thanks to him. So I tried everything from the original unmodified Simm SB.bin file he provided to me. Then file the SB.bin...
  4. chacal231077

    Namco System 12 Romboard IC12 ,IC13 dump info game

    Hi! :) Because under the motherboard there is a SOC1 Ver.A sticker?( But I think that the different parts were mixed motherboard and romboard, the people who had this equipment, perhaps believed that we could repair by exchanging the PCBs like simple mechanical parts :whistling: Too bad...
  5. chacal231077

    Namco System 12 Romboard IC12 ,IC13 dump info game

    Hi! :) nem Thank you again don't forget that I removed the 2 mflash roms in IC12 & IC13 :D https://i.ibb.co/zN94bfV/20240707-141952.jpg
  6. chacal231077

    Namco System 12 Romboard IC12 ,IC13 dump info game

    Hi! :) I just dumped IC12 & IC13 from a Romboard without Keycus which normally and from a Tekken 3 to Soul Calibur (SOC14/VER.C) but I have the impression that it happened in the opposite direction to Tekken 3 towards Soul Calibur (SOC14/VER.C) and returned Tekken 3 :whistling: If anyone can...
  7. chacal231077

    Capcom Q-Sound amp help?

    Hi! :) That's not what I asked for :unsure: How to wire the Sega New Net City sound control PCB to the Capcom amplifier ?
  8. chacal231077

    Taito F3 ENSONIQ correct voltage calibration

    Hi! :) so here is the news I calibrated the +5 volt as indicated for the ENSONIQ ESPR6 version. :thumbup: I still have no sound X/, when I increase the volume of my speaker I hear a hissing sound at normal volume, but no SoundFX or music. I wanted to know how to test the ENSONIQ ESPR6 to see...
  9. chacal231077

    Tekken 4 can only reach this screen and then it keeps freezing.

    Hi! :) There is only one DVD version of the original game. :thumbup: If you use a low quality DVD burner, there will be a lot of read errors and crashes.:S The original DVD player is complete crap, it has 512 KB of buffer, and with tekken 4 there is bad sync when Heihachi talks to Kazuya...
  10. chacal231077

    Tekken 4 can only reach this screen and then it keeps freezing.

    I love this game, when the PS2 version came out, I said no, it's too lousy on console, I would buy it on Arcade, 3 years later I bought it on Coinop Express for 300 euros with Namco system 246 B Assy :thumbup:
  11. chacal231077

    Capcom ZN2 Motherboard Sound Problem machine gun noise

    Hi Hi! :) you also say perhaps that the regular input buffers are defective, compared to when I press the buttons, but the computer when it does its techniques does it too, it's curious.:S I looked at a ZN1 motherboard that I had as a spare, it's the same MCU, but no luck, it was corroded...
  12. chacal231077

    Capcom ZN2 Motherboard Sound Problem machine gun noise

    ok i found Sony CXD8661R is custom overclock chip request by capcom :thumbup: I have a spare ZN 1 motherboard, I don't know if it's the same reference, I'll look ?(
  13. chacal231077

    Capcom ZN2 Motherboard Sound Problem machine gun noise

    Hi! :) but where is this chip on the motherboard ?(? So the problem is present with or without kick harness X/
  14. chacal231077

    How to program a LH28F160S3HT-L10A for firmware Dimm board ?

    Hi! :) I would like to program an LH28F160S3HT for the firmware of a Dimm Board because the TSOP48 slot has suffered damage to the pads ;( the problem is that I think the LH28F160S3HT must have a byte of protection against erasure and programming, because impossible to program the chip is...
  15. chacal231077

    CPS2 Black Marvel vs Capcom may be corrupted, infinity key or the CPS2 Suicide Free Modchip not working

    Hi! :) I'm trying to save a Black CPS2 Marvel Vs capcom suicide :) The problem is that with the infinity key or the CPS2 Suicide Free Modchip I have a blue suicide screen ?( The problem is that the SIMM was reprogrammed by someone ubn, because the owner of the game explained it to me X/ I...
  16. chacal231077

    Capcom ZN2 Motherboard Sound Problem machine gun noise

    Hi! :) I have a sound problem, when I make inputs with the buttons, I have a machine gun noise :Scoming out in addition to the sound effects of the shots. The computer also when it releases shots, the sound of machine guns is heard. I have already changed one of the Dual Op-Amp 4558 near the...
  17. chacal231077

    SPIKEOUT AUDIO MIX-S and MIX-L board project

    Hi! alpaca :) Great you finally finished your project well done :thumbup: Kind regards James ;)
  18. chacal231077

    Capcom Q-Sound amp help?

    Hi! :) I would like to replace the Naomi sound amplifier with the Capcom Qsound amp . but how to wire with the sound control pcb of the naomi cabinet ?
  19. chacal231077

    Tekken 4 Attract Mode Music Mod

    Hi! :) has anyone tested it on a real namco dongle ?
  20. chacal231077

    Dead or Alive ++ Tecmo TPS ZN Mask Rom cross reference

    Hi! :) nnap Thank you for your help :thumbup: what do you mean by pin33 to put it in the right mode (byte/word) ??(
Back
Top