Search results

  1. Ziggy Cheetos Dust

    A mouse f****** my Cyber Lead. Time for a restoration.

    Well I took the plunge and started swapping out SMD capacitors on the sound amp. After two or three I’d plug the board back in and try it out to see if it had solved the problem. I didn’t want to do any more of these little fellas any more than necessary. It was only when I did the last two that...
  2. Ziggy Cheetos Dust

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    I can confirm mine also does this. I’ve got a remote board that has the coin switch on it that works fine, so it’s not essential but is frustrating. I’ve also noticed on some cores, such as Donpachi or Dimahoo when trying to remap other buttons - the Mistercade essentially ignores my button...
  3. Ziggy Cheetos Dust

    Hi from Lille, in France

    Welcome to the forum. You’ll find lots of good info and people here.
  4. Ziggy Cheetos Dust

    Australian Roll Call / Registry / Deals Thread

    Is the Atomiswave monitor/chassis combo a massive dice-roll like the Blast & Windy II or is the chassis repairable?
  5. Ziggy Cheetos Dust

    Namco JVS I/O pcbs documentation list

    Thanks @notsonic. Good discovery there.
  6. Ziggy Cheetos Dust

    A mouse f****** my Cyber Lead. Time for a restoration.

    I received the parts to make a little extra button harness to connect to the Mistercade. I used a slightly too large wire gauge but the crimps should hang on. The Hirose (CPS 2) end was fine but the EL end wanted a max of 20 AWG.
  7. Ziggy Cheetos Dust

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    T Thanks @ShootTheCore, I can always count on you for help. I moved two jumpers labelled L & R from Local to Remote but it didn’t change anything. I’m running an admin board upstream from the remote, so perhaps that has an effect. None of the buttons on that remote except Reset worked either...
  8. Ziggy Cheetos Dust

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    Hi all. I’ve just tried using the headphone out on the Mistercade remote and no sound comes out. I’ve tried two remotes and two Mistercades with no luck. What am I doing wrong? Thanks for any help 🤙🏼 Further to this, one remote’s volume knob doesn’t do anything either. Any ideas?
  9. Ziggy Cheetos Dust

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    @jimbodeanny I’m pretty sure I see the same thing - but just with a coin mech. There are still a few mysteries with button mapping for me as well. When trying to map games that have P2 Start and then coin, the dedicated P2 Start and coin buttons I’ve setup wont accept the input.
  10. Ziggy Cheetos Dust

    A mouse f****** my Cyber Lead. Time for a restoration.

    Much appreciated @PASTBLASTER
  11. Ziggy Cheetos Dust

    A mouse f****** my Cyber Lead. Time for a restoration.

    Thanks mate. Thats great info.
  12. Ziggy Cheetos Dust

    Cyber Lead NTSC PCB Assembly (link board) Info

    Thanks @notsonic. It took me a couple of days but I’m across what’s going on inside now. Like others I’ve got a few redundant cables in there now, but I like having the original in place instead of wondering what was ripped out throughout its life.
  13. Ziggy Cheetos Dust

    Cyber Lead NTSC PCB Assembly (link board) Info

    Good info and great job on the breakout cable. Why are there two VGA outs on the JAMMA JVS adaptor? I pulled one today and the monitor signal stayed on? Is this because the second cable is going to the VGA out on the comms box?
  14. Ziggy Cheetos Dust

    A mouse f****** my Cyber Lead. Time for a restoration.

    Ooof! And finally got it back inside again. The path from the garage to the house is rough and I’m praying the shaking doesn’t cause any issues. But we’re all good. The stereo sound on the CPS games is unreal. One speaker is still slightly louder than the other. All that’s left is for a slightly...
  15. Ziggy Cheetos Dust

    A mouse f****** my Cyber Lead. Time for a restoration.

    I’ve plugged in the VGA cable directly from the Mistercade to the chassis. I also did more monitor tweaking. I’m sure there’s more I could adjust but it’s good for now. Here are the final pics in daylight. The lighting for a lot of my pics hasn’t been great I know. Those drip marks on the...
  16. Ziggy Cheetos Dust

    Cyber Lead Pinouts and Part Numbers Updated

    As expected @NFGx unplugging the V MINI fixed everything. Thanks dude. 👍🏼
  17. Ziggy Cheetos Dust

    A mouse f****** my Cyber Lead. Time for a restoration.

    Thanks for the tip. I did think that before the restoration that Demon Front did look a bit blurry. My eyes at gaming distance aren’t great but I’ll give that a try.
  18. Ziggy Cheetos Dust

    A mouse f****** my Cyber Lead. Time for a restoration.

    And a game test… View: https://youtube.com/shorts/gnTIs22sCkw?feature=shared
  19. Ziggy Cheetos Dust

    A mouse f****** my Cyber Lead. Time for a restoration.

    I installed the Mistercade and remote board. We have glorious stereo! I adjusted the picture in a brighter part of the day and can probably lower the contrast a tad. It’s looking good though. Convergence and geometry are excellent. Tomorrow I’ll be ready to bring it into the house 🤙🏼
Back
Top