Search results

The tube is the same the yokes are not

You can just use the ms9 yoke but with ms8 rings already set

If you got no red, most likely there is something damage on the neck board, not the tube! just swap the neck board to confirm this, then will be easy to address the issue just comparing the two neck board PCB , just testing any component in red line

Wich chassis is this? Nanao ms9 o ms8?

Maybe the H Driver transformer , broken solder joints or just itself failed

You should replace U550 ic, LA7853 and all elettrolitic caps if you have still not done. Also check for bad solder joints.

Gmk29 , ms8 29 not have this pot

I would just like to point out that the ABL trimmer, present on MS9 and more recent chassis, should always be positioned at maximum, anti-clockwise, otherwise it will limit the electronic beam current and on the brightest scenarios it will cut the general brightness, it will limit the flashes...

It might be a good idea to post a photo of the chassis, maybe so someone here could help you better.

Desolder the custom PCB mounted vertical, the one with trapezoid trimmer, check for broken solder joints on the PCB male pins , this PCB directly influence the pin amp circuit , the pincushion amplifier is mounted on the rear of this PCB, just mounted on the heatsink. Check all solder...

Why Taito do Not made E2 illumination panel? We all need one x cab!

I'm in for one set

A cap fail on V blanking circuit and yes you should find this near the V. Out ic

hello I'm desperate, I'm looking for the inner frame of the Vewlix F monitor, I wanted to change monitor but I realized that someone had done it before me by simply gluing it to the glass with double-sided tape!! Now I have a Universal Monitor Mount, I have a new monitor but I can't do anything...

They are nice! No plan for Egret 2 and Capcom Impress?

G1 mod will improve the focus performance on ms9 but ms8 still way stronger in overall sharpness.

May I know the color paint? Candy White LB9A 2K?

First of all, you should identify the monitor chassis or put here some photos of the chassis otherwise could be difficult helping you.

RCA tube + K7400 was the last 15khz monitor series with was released by Wells Gardner, it was the successor of the legendary K7000 by the way I do not know if it deserve the same awesome picture quality.

Awesome cab, you got a WG K7400 + RCA tube, if it is the same as WG k7000 + zenith tube then you got the best arcade monitor ever made for 15Khz games