Search results for query: *

  1. bagheera369

    FS Candy in TX - Multiple Blast City, Atomiswave and Versus City Cabinets

    Just trying to save you some headache, if I can. Slipping, or getting a poor angle on drilling those CP locks is a sure fire way to fuck up the surround in a hurry....ask me how i know. I wish you luck on it!
  2. bagheera369

    FS Candy in TX - Multiple Blast City, Atomiswave and Versus City Cabinets

    That back door should just be on there with screws. That lets you get to the PCB door, and the coin door. It also , if you're VERY careful. can let you get to the nuts/bolts holding the control panel on. If you carefully disconnect the harness wiring from the back of the CP, you can get...
  3. bagheera369

    WTB any JNCO jeans (size 36's or above)

    Oh man...that makes me long for two things...the days when I had JNCO's and barely a care in the world....and a time when I could fit a size 36. Thanks for the nostalgia, asshole. :D I wish you luck in your hunt.
  4. bagheera369

    FS Sega New Astro City Cabinet

    That's a STUNNER. I wish you luck with the sale!
  5. bagheera369

    FS Wei Ya C3129A

    Attention @xmarksthespot , if this is working, this may be of some help to you, depending on what monitors you have in those remaining AWSD's.
  6. bagheera369

    Sammy Atomiswave SD Restoration

    Having 3 of these, I've left them all stock audio, with no taito amp, but I run pcb's and misters in them....not JVS stuff. The monitor is far and away, the more important aspect. I'm about to go sit in the arcade and test a recalbox Jamma setup I picked up, and looking at all the cabs, I...
  7. bagheera369

    FS Candy in TX - Multiple Blast City, Atomiswave and Versus City Cabinets

    You know....given that I've been hunting and collecting AWSDs/E3's in Texas for 12+ years and have only pulled 3 damn cabs, you'd think I would have seen, AND been all over this....but FORTUNATELY, my pc took a crap this last weekend, and I've been reinstalling from scratch and dropping in new...
  8. bagheera369

    Kraken Spinner Pre-Orders

    Shorter depth of the mechanical parts under the control panel, making them able to fit in multiple candy cabs....that's the primary difference, to my knowledge.
  9. bagheera369

    FS Taito Group Purchase Thread - Round 1 (Egret 2 OEM Stickers/Decals)

    @ImportantBet - Hope all went well with this, and you were able to recover funds and move product smoothly! Thank you for doing this, again!
  10. bagheera369

    Name that connector: the thread

    I'm glad you were able to get it working!! :D They definitely made interesting ones....despite the fact that I've spent 10 years at Texas Pinball Festival, I have not gotten to play anywhere near as many as I'd have liked.
  11. bagheera369

    Name that connector: the thread

    @Mrhide - You might give a shout to this guy. http://zzzaccaria.com/arcade/arcade.htm His email link is on the page i posted. He has a page documenting his work on a Quasar here. http://zzzaccaria.com/zzz/QuasarRestorationMC.htm If he doesn't reply, put a metric and standard ruler on the...
  12. bagheera369

    Name that connector: the thread

    @ItsBobDudes - Confirming thats definitely a neo power supply.
  13. bagheera369

    Name that connector: the thread

    Just saw the post, and was going to shout info, but you found it. We had to use these for some chinese crane's that were purchased, to adapt american PSU's into the chinese cranes, because the company in china was out of the PSU's and wasn't able to meet demand on them. I think we had to buy...
  14. bagheera369

    Time Crisis 4 gun calibration issues

    Very glad to hear you got it sorted!!!!
  15. bagheera369

    Alberto’s Vewlix Diamond Optional Extra button panel

    Hey @opt2not - are these metal base, or pure acrylic? They look excellent, and I was going to look into getting a set for my cab.
  16. bagheera369

    EZ-Swap PCB Holder Set

    @NFGx - Once the STL file goes up ready to share, shout. I can donate a little as a thank you. This would work out better, as I have printer access here, and don't really wanna risk/pay shipping from AUS. It's a great design, and thanks a ton for sharing it here!!!
  17. bagheera369

    Ps2 With MemcardPro2 - issues with OPL and refreshing?

    Haven't done anything with mine yet....but I should. Just too many projects going concurrently.
  18. bagheera369

    Time Crisis 4 gun calibration issues

    No worries. Last I spoke with them, no cost to call Namco or Speedy's at all. It's worth attempting the conversation with them. I'd start with Speedy's, as TC4 is older. Also....before you sell that cabinet....if it has the Sanwa PFX tri-sync monitors....those are REALLY solid monitors...
  19. bagheera369

    Time Crisis 4 gun calibration issues

    Hey there. So here are a couple things, based on what you've said. ONE Have you moved THE CABINET to a different location? If something is triggering the IR sensor in the upper left, regardless of what array (1p or 2p) you used, it could be environmental. Not likely, but stranger things have...
  20. bagheera369

    Easy Arcade 2?

    I think it's the problem with a lot of stuff in this hobby. There are brilliant people, doing brilliant stuff....but the skills at technical creation, and technical assembly, are so vastly different from the business resources needed to produce a product en masse, and market it to the right...
Back
Top