Search results

The AO forum has a know faults and solutions section. https://wiki.arcadeotaku.com/w/ExA-Arcadia I also experienced the white screen on a 2020 year manufactured motherboard and the service team had the system back to me within 10 days. You can have your game versions updated at the same time...

That's weird. The audio comes out of the green (or possibly the blue) socket on my motherboard. I've not checked if it's missing channels or anything, but sounds good like a mixed down version of the audio. I'm going to have to check again to make sure.

I believe you would just need to press key to get past the date error each time , the system will set some default date and the game will work as normal with the AGS setup you have. I've only had the BIOS fail on another X2 game cyber diver, it popped up the date error once and then did not...

I have not change my battery yet, I have a NOS Darius unit and the voltages remain okay. If the battery dies or the CMOS is altered on it will give Error 901 and will not boot with an original drive and dongle, however a AGS restore kit can be used.

Great work!, I would also like to purchase if you have any remainders.

Thanks so much for the detailed information. I should be able to test a K91X1243A here at some point in the future, I assume it will be detected but not support enough buttons for DBAC compatibility. Don't feel you need to go reconfiguring your op friends cabinet - unless they are into that...

Hi Lemony, Were you or somebody else on the forum test able to test K91X1243A on a DariusBurst to confirm that it works? I had always thought it was only the K91X1202A that could be used as per the manual. Would anybody happen to know if the 6 ch sound amp must be K91X1108A or do you think...

Hi, Is there a known safe procedure for replacement of the battery on the Taito X2? I understand that some Taito X2 motherboards keep security keys in the CMOS/BIOS. I have a Darius Burst system and would like to keep it running the original drive/dongle if possible. My fear is that the...

That's awesome if it's just the ini for single screen?:) The JVS toggle does nothing tho I guess. Andygeezer is still operational, I've used his services and would recommended him. I read somebody came up with a patch to flip the second monitor to avoid the need to run an external processing...

Hi @sammargh It's kind of ironic that the game is available to play everywhere except for on the original Taito X2 hardware. In terms of game preservation it would be cool if somebody has a solution for single monitor or dual monitor with second monitor flip. Quite a few people including...

Good progress! I have an untested pcb set and original harness to setup for testing with JAMMA and so will be watching with interest.

They are JAMMA compatible. It's just a matter of alignment, a harness would make it easier to avoid damage to the pcb. The games have a removable edge adapter that converts the pcb in the case to the external gamma connector from what I remember If you ever fancy selling or trading let me...

Hi Dion, Do you remember if on the image you have write access to the PC game files or were they protected? Was it a standard usb or flash card that could be read in another PC? I know somebody who has the 2012 setup and noticed when playing it does not have the shader fix installed for sun...

Just wanted to say a big thank-you to waiwainl for the guide. I replaced all the fans, same models as indicated and the unit hardly makes any noise at all, similar now to a regular PC.

I can understand why they used the industrial fans for longevity, I will take a look to see if there are other components that can be swapped in-place and have a lower noise output and similar performance. The noise is not too bad once inside a cabinet with the sound turned up. The software...

I would love a flash/multi board for this system - a lot of people have the motherboard. Cyvern, PuzzLoop and Panic Street, Sengeki, Block Buster are brilliant fun. Also exists for the KSNS is Cyvern Plus and a the Cave prototype Yuki Buta Man-P but the ROMS have not yet been found.

Has anybody attempted a fan replacement on the system 357 or might the unit work with the fans unplugged. I assume if it is PS/3 based it may not require them all if running in a colder environment. I followed Nico's excellent silent fan mod for the Taito X2 and it made a huge difference, just...