Search results

PM'd sir

Hi, Is the Sega Triforce still available?

Are you using a Supergun of some sort? Maybe it has a resistor pack or something which is causing the Trinket to think a button is pressed?

Haven't seen @rewrite post in over 2 months - hope all is ok/well

@rewrite Sorry for your loss, been though something simlar a few years ago - still hard I'm on the waiting list, unsure if its worth noting now but; XenoCrisis - Just bought the Neo Geo ROM from Bitmap Bureau site :) Donor (MVS) Cart - I have a spare v3 161, but might not make sense shipping...

Late to thread (was following the reverse engineering thread) - looks like this list might be closed now but if there is a waiting list, please put me down for a MVS cart.

This is most awesome. Should this become 'a service' that some with the skillz might offer, will it be limited to certain versions of the 161in1 carts?

PM'd

Aww, came late to the party :( Watching this thread should more boards get made

Yup, works great. I had a problem initially so i wanted a visual indictor if it was holding the start button or not, so I shifted the input from Pin1 to Pin2 and used the onboard indictor LED (believe it needs to act as Pin1?) to show when Start is being held down. Again, the fear of screen...

Thanks @GeorgeSpinner ! My original Arthrimus mod just wasn't working anymore so I checked this thread and noticed your solution. No fear of screen burn-in from the 161-in-1 basic menu if the cab was turned on and forgotten by the kids :)

You'd connect video ground to any of the grounds on those BNC connector wires typically

+1 also interested

Hey imbord3rlin3, Thank you for the offer but i'm sorted for now - I think 'pro pow 3' refers to the PSU, the pow 3 is for the later 9V console and mine is a 5V unit.

Seems it something that people normally damage or lop off the console. Might use a panel mount socket like this

Cheers for the link. I checked the data sheet and I don't think that lines up. The hunt continues!

I have an AES unit which someone removed it's headphone socket. I've searched online using images as reference am I'm having little luck. Might anyone know the manufacturer/part number of it?

Mod wires removed and traces fixed. Also removed those random caps from the bottom of the board. Also needed to replace some of the RAM, namely 2x CXK5864BSP-70L and 2x CXK5814P-35L and then it all sprang into life! Just need to figure out screws for it now :) Caps ordered as it's prob worth...

Sorry no, on the PICKnMIX board

Thanks for the tips and photo - that board might be a later revision but shows that the Neo-Geo units tended not to have random bodges apart from that additional PCB power fix I've seen around the 'nets. Plan - once I get a video cable + PSU I do as you suggest, I will document the wire bodges...