Search results

I usually let output default settings in generic 4:3, I've installed the latest Beta fw to get Sega Mega Play to sync, but no success. I've had sync issues with Green Beret PCB, Sega System 24 and Atomiswave in 15 kHz as well.

I've done a few tests (I use Vega Jr. supergun, LG C2 42" OLED TV, Genesis 1 RGB cable and OSSC 1.6 with 1.06 Beta fw) : CPS-1 Banpresto PCB (Denjin Makai 2) Sega System 18 PGM Namco System 2 I don't happen to get Sega Mega Play to sync well, and AtomisWave doesn't sync at all.

Have you installed the latest Beta fw ? It seems it's more stable, no more sync issue with most of boards. Details there : https://videogameperfection.com/forums/topic/ossc-v1-xx-series-beta-firmware/ The hardware mod to install it is explained in the link (removing a resistor and installing...

Interesting topic. Does anyone know if Sega Mega Play works well with an OSSC ? I've tested in 256x224, let OSSC default profile, turned “Allow TVP HPLL2x” option to Off, moved “Analog sync Vth” option to 146 mV to get something displayed, but it’s still instable. What would be the more...

I meant graphic card power wire.

Two days ago, my TX3 booted (black screen) with no beep. Then, I removed RAM, the result was not better. Btw, I noticed if the graphic card wire touched the graphic card, the TX3 didn't beep ; a kind of security ? So, I fixed the wire to avoid touching the graphic card, and the TX3 booted and...

Oh, nice ! You mean you have soldered 2 x Fast io boards on the same Jamma fingerboard as player 1 & player 2 ?

I personally used buttons start + test to exit. Open cjvs.cpp, find the code posted above by yosai, and replace the line : if (jdata[3] & 0x02) with that one : if (jdata[2] & 0x80) to exit with start + test instead.

It works fine if you recompile yours. Btw, Coin button is missing in struct JVSKEY. Anyway, I use Service button.

Here you go : https://gofile.io/d/7jXB1K

SeDiv in full version allows to copy HDD content without clearing password, displaying HDD content, clearing password and other features.

I'm using Lindbergh I/O (Sega v3 I believe).

Thanx for the reply. ;) I have already reflashed it yesterday night, the issue is solved. Btw, I still have 2 questions about minor probs : I have noticed when I launch a game, there's always 1 credit automatically added. Is there a way to remove that (I use your latest 2.0 multi version) ...

Version 1.02

I have used another Elsa Gladiac 979 GT and the menu is displayed in 640x480 (with dip #2 720p enabled), and any game returns to the multigame interface.

Games and updates dat files.

Indeed, it is not. It's the launcher.

vdimg_ec.img contains the following files :

Hi, I have recently bought another TX2 unit (215A model) with 1 GB RAM, and I have noticed the framerate is low in all the games. Is it due to RAM, a bad setting or JVS IO board used ? JVS IO board used is the one from Lindbergh cab.

In my TX2, RAM is 2 x 512 MB (1 GB) 1Rx16. Can I replace 1Rx16 with 1Rx8 like yours above ?