Search results

MMAO so I can get these a new home and out of my way before they get damaged...

Second PCB, this one is Moonwalker. Fully intact but wont boot, this one had 2 bad traces that could find, repaired, still no luck. Price is for both,

Trade me....

I have 2x Sega System 18 PCBs that I would like to find a new home for. One (originally Shadow Dancer, 2 oscillator version) is untested as I picked it up in a trade and it has had some surface mounts scavenged (before me) and one oscillator, this would be a good parts board IMO. Second one I...

Also note, my memory test failures were on BIO3, you are on RMS3, so pull that board and look for ram to test / replace on the RMS3 board.

I think this one is normal, it is just telling you which switches are open (0) or closed (1), #8 on S1 being an X may be not used or a problem, I will try to check one of my stacks one night this week and report back, but I would focus on the ram issue first that should make your game problems...

As I expected, you have a ram failure. Since I am comfortable with desoldering etc I just desoldered, socketed and replaced all the ram and problem resolved. I dont think I could find anything that listed which RAM was tied to which address / location, but now that I have mine all working, I...

I have two working boardsets for sale. One needed a trace repair. Minimal testing. $150 each PPff shipped $175 each PPgs shipped $280 PPff shipped for the pair. $325 PPgs shipped for the pair. pics can be found on KLOV https://forums.arcade-museum.com/threads/time-killers-pcb-x2.540688/

I had similar issue when I first tried mine. Run the Test Tape and make sure you dont have any ram errors. I had to replace a bunch of ram on one board and then all errors disappeared on mine and all games started working perfectly. I am not 100% sure on what the code does, but it is my...

Here is a thread I started with roms for on of the two daughter cards. All the files are the same if you have the other daughter card, just locations are different. Good luck. https://forums.arcade-museum.com/threads/convert-sega18-clutch-hitter-5987-daughter-card-to-no-mcu-moonwalker.539890/

I found another site that has more romsets than the one I originally used, Is it the WORLD romset? Thanks!

Can you share which romset you are using. I am trying to figure out which set to use with the Any Romboard roms, but I cant seem to find a set that matches the naming you have attached her. Thanks in advance! I already got MW running on this daughter board, want to see about SD next. Thanks!

It may also be P1/P2 hold and then press coin up.

I am pretty sure it is P1/P2 press and hold. For sure there is a jump back to menu command with the latest software. I can plug mine in tonight and test button combos if P1/P2 does work

W AWESOME! Enjoy and report back with what you think!

STL is in this thread, just read back a little bit https://www.arcade-projects.com/threads/get-your-deco-multigame-here.4149/post-404846

if you have had yours running one game off a tape, you will be very happy when you see how deep the library is and how fast the games all load. If you look for the 3D printed case and the Repro base plate I built for this system, you will see how the cables need to route etc. If you have...

This is an awesome solution for your problem, No soldering, plug and play. AND you can play the whole library from Eprom, no tape or security dongles to keep track of. Its one of my favorite @Darksoft multis. I designed a 3D printed plastic case that holds it perfectly, you salvage the clips...

I had one that was undumped, so they are out there for sure. I got it dumped and sent in with some help with the peeps here. I think one of the PROMs I had was helpful. Thanks to all those who work to preserve these for us to play.

I still cant believe how awesome that looks. great job.