Search results

Nice 👍I would love to see them on my vewlix

Awesome Job Franco!

Just mounted the sub panel. I had to do another hole for the Power on/off button. Added a usb Port, and a switch for the "dp-ls-rs" setting (some old doujin games doesn't like the d-pad). Now i need only the volume knob. I've also wired the Brook board, the card Reader light, the turbo led...

I tried this cheap led strip on the control panel, but the light was not uniform I got this one meter fcob led strip. The result is fantastic but it's really too bright, i need a dimmer. I only used 58cm. I could use what's left on the marquee I also got some gray plungers, wires and sanwa...

Wired and mounted the IEC connector and the outlet The outlet fits perfectly

Quick update: My pc case is too big, so I mounted everything on the wood panel Also changed the rear fan with a corsair from the PC case

Mounted the new monitor, an lg 1440p freesync. I Just used a TV Wall mount with some spacer and put the frame togheter with some L brackets like in this post: https://www.arcade-projects.com/threads/taito-vewlix-monitor-yellowing.19984/page-2#post-368512 A lot of screw/unscrew to adjust the...

I did some work in the garage yesterday. Control panel plastic side Pieces Pretty beat up, a lot of bumps and scratches but only 2 or 3 deep marks I wanted to use sandpaper, but in the end there are very few deep scratches. I used 4 polishing sponges of different hardness and a polishing...

Thanks Brother. I have done some work on my consoles/CRT and music instruments.

I forgot those rusty feet. To remove the feet you have to unscrew the entire leg: Vinegar bath for 12h and cleaned with a metal brush Then some black Paint

Bravi! 💪

oh so you basically use only the four metal pieces screwed onto the 3d printed clamps 0_0

Awesome stuff Boys, I've bought an LG 32gn600 to swap my stock 720 monitor, so much interesting information here 😍. From what I've understand those clamp are attached to the entire frame of the old monitor right?

Ok I've pretty much cleaned everything, I've also entirely disassembled and cleaned the original buttons and joystick ( I want to change only the Blue plungers with another color) Also greased the joystick pivot and the buttons springs with shinetsu grease

Polished the 2 little metal brackets of the Cp move strip with a dremel. BEFORE: AFTER Also cleaned the wood panel with baking soda/salt/lemon, and then applied olive oil and let It rest for 48h

Time to clean the control panel The plastic Coin slot was yellowed. I've used some Sandpaper (320,500,800,1000, 2000, 3000) to bring it back to White. Before: After: I've to keep cleaning the cp today, it is certainly the dirtiest part of the cab

8o

can you send me a link of the amp you use? Thanks!

Thanks :thumbsup: I forgot to ask you.. What monitor did you get in the end?

Yesterday I had my first deep cleaning session. 3 hours for the body, I'll do the control panel later There was not so much dust but a lot of dirt and a THICK layer of nicotine Taking the cab apart was a piece of cake, thanks to the tutorial by @penrhos NOT FUN! oh and I made a new friend