Search results

  1. S

    [FS] PGM Cave Conversions [ Ketsui / DDPDOJ / Espgaluda ]

    Received the carts and had time to test them. Works great! Thanks!
  2. S

    STV Roll-Up Pack: All roms for the Darksoft STV Multi Kit

    Easy-peazy just drop this file in the game_22 folder. The change is permanent but will work in all bios regions. Could be added as a separate entry to the game list I guess. It crashed during the attract loop on my cab but my ST-V is acting up so I'm not sure if it's the game or my pcb.
  3. S

    [FS] PGM Cave Conversions [ Ketsui / DDPDOJ / Espgaluda ]

    I would like Ketsui + DDP if you are ok with splitting. Mine are extremely buggy and I don't have the patience to desolder/resolder them.
  4. S

    [FS] Lot of Gundam Games for Namco System 246 $200 shipped (US)

    I have a Mega Everdrive v2/X7, VMUs, Playstation & Playstation 2 memory cards I'd be willing to trade along with some cash to offset
  5. S

    Namco Card Reader, S-CONV and Namco 256 Pin out help

    I have a 2p tekken panel that I have working with a card reader. If it would help I can grab some pictures of the setup. I had to rewire part of the cable for it to work properly from what I remember because I was "breaking" how it should've been done with a vs setup. Scratch that, here's some...
  6. S

    SYS2X6 USB Dongle Rollup Pack

    no, you just have to match the dongle to the card type so TED2 are for World cards and TED1 go to Japan cards.. you'll know if the dongle matches because it won't reject the card in the test menu
  7. S

    SYS2X6 USB Dongle Rollup Pack

    The important part with DR is to make sure you match the dongle to your cards. The JP and world (TED1 vs TED2) have differing ciphers and as a result the cards won't work. I ended up crafting my own TED2 binary for the dongle myself which has been working well.
  8. S

    Making an English version of Typing of the Dead Arcade

    The patch I had provided has most of the progress with regards to my input to translating the game. It should have the full translated dictionaries as well as keymap. I might have neglected to include the red blood patch but that would be the only thing missing. Everything else was done in...
  9. S

    CPS1 Multi. Official Thread

    Wow looking fancy! And with 1.5 support well worth the wait! I figured I'd get to skip this multi since I basically have all the cps 1 I want but you've got me interested
  10. S

    An improved JVS-PAC (JVS-PAC 2)

    Basically on JVS there are output drivers provided which can be used like an inverse button. I am using the 837-14572 Sega board which gives me 20 output drivers. Those link up to the LED power leads on a button. In Rhythm Tengoku whenever the corresponding button is pressed or a button needs...
  11. S

    An improved JVS-PAC (JVS-PAC 2)

    Would it be possible to expose the outputs on JVS as HID lights? I've been doing stupid things like wiring up a Rhythm Tengoku panel to my Net City and if I had HID lighting I could wire it into DDR or other stupid things :thumbsup:
  12. S

    Retro Scaler A1

    Double-post because the other one's old however you can add Big Buck Hunter to the supported list :D Unfortunately the gun doesn't work right which I suppose isn't shocking, but at least good to know?
  13. S

    [FS] JAMMA extension harness

    Would it be possible to purchase an extension cable with a voltmeter?
  14. S

    Retro Scaler A1

    X68000 works fine with the scaler firmware, the only "gotcha" is the auto-sensing can get confused if you are flipping between 15k/31khz really fast repeatedly. If it's just a game that does a normal resolution switch it's fine. I have quite a sizable collection of boards, computers and...
  15. S

    Sega System 16B multi kit installation & support

    I also had no issues using my Xeltek 610P writing/verifying chips. I'm mostly posting because I wanted to throw a warning out on the Top 3000 and to not leave it plugged in. The power supply on mine failed in a fashion that it almost burnt the house down as it had melted itself when I came back...
  16. S

    Finally, multi System 16B (Sega)

    Received mine today and got to flashing the chips. One of the 27c322s a pin had a completely bent up from missing the socket and the 27c801 came not erased. Even after 90 minutes under my eraser it refused to read back blank but thankfully I have spares of both chips and got by. Working great...
  17. S

    Axun Workshop - JVS / JAMMA Control-Box(CBOX) SuperGun

    I was wondering if there's a backlog currently? I ended up deciding I wanted to use the jamma extension cable that axun makes instead of the extension I'm currently using. I placed an order for just the cable October 2nd but haven't seen anything. Thanks!
  18. S

    Retro Scaler A1

    If you want something ugly you can do a chain like mine :D If you want to be lazy about it you can use a scart to bnc and then bnc to vga. This also includes a converter to get to jp21 for a computer I was using (FM77AV) but basically what I did was move composite video cable to csync and...
  19. S

    My CPS1 conversions info

    You could use ArcadeRomPatcher to de-protect the game (if the build is supported) and swap the busted C board with a CPS-B-21 Note: you need to register to view the thread. Basically you run the rom set through the app using...
  20. S

    Axun Workshop - JVS / JAMMA Control-Box(CBOX) SuperGun

    I'm confused, you tell me if I need them or not. I did order recently and mine has the red LEDs: But when I opened it to inspect the build quality my chips were marked 2.1? So I have no idea. If I need them put me on the list. If I'm good awesome.