Search results

Interested please add thanks!

Cool thanks. I saw it briefly on the settings on the cps1 core but didn’t know if you could turn it on. It may be time for me to order the parts and try it out anyway.

I was thinking about using Mister with the Jammaizer. I wanted to be sure I could use all the arcade cores with SNAC. Do you happen to know if most of those have the snac option? Slightly off topic

Great thanks! I’ll take a look see then.

Anyone have an idea where to start with this board that is missing a sprite layer which appears black in the screen shot? Plays fine with sound other than missing that layer. I found schematics for Lethal Enforcers 2 but couldn’t find specifically for this board. It seems like people do not like...

That’s interesting, it does have an impedance switch on the remote board to 1k as well if I remember right.

Just for reference this is the model I have. https://na.suzohapp.com/products/monitors/49-2715-00?REF=SN

My chassis is auto switching so I didn’t have to to manually switch res. It is definitely better than using a LCD. In 31khz the geometry issues were more apparent and it has a weird stretching along the edges of the tube. Also, I used a cheap vga dreamcast cable with a female to female coupler...

Is this the 3129? If so it will auto switch to 480p. At least mine does. Used dreamcast with it for some time. Switched to a pc crt because the geometry was so bad.

Just read the manual which I’m not sure why I also missed. Looks the same. Thanks for pointing out this capability.

It looks like I did but I didn’t realize it! Thanks. The button config the same as the HAS?

Just had a chance to test out the ez boards with Mc Cthulhu on NES. I purchased some rj45 to NES cables from jasens customs. The A & B buttons are mapped to jamma buttons 5 & 6 which is fine for a usb fight stick but not fine for a jamma cab with no kick harness. It looks like MC Cthulhu is not...

I have the shorter buttons as well. Any chance I could be sent some too?

I’m using the EZ boards with Mc cthulu chips and rj45 to usb. I wanted to let you all know the suggested setup is working. Appreciate the advice.

Just wanted to confirm the jammaizer + vga hat & Mc Cthulu with rj45 to usb cable is working great for a groovy mame setup. The rgb amp is a major improvement over the jpac.

Can’t speak for others, but for me it was just a knowledge gap. Seems you have cleared that up. I’m waiting on Cthulhu chips to test but I went with the EZ boards and rj45 to usb cable.

Interested in 2 extension harnesses

It looks like the Brook Universal might be the best bet since it seems to have a USB port on it? Given the issues with cables you mention, this could eliminate that issue. I don’t have any experience with these boards so I’m taking a guess.

Since there are currently no USB out options for 20 pin connector, curious what the options are for usb out?

Started to look into modding the PDP Klassic as it seems a lot easier to take apart than the TE. It looks like the Xbox 360 buttons at the top middle make contact with the pads from the pcb under them in the inside. So I can’t really think of a good way to re-use them if modding for db15. Player...