Search results

buffi, do you still have the sketch for this? I want to wire console sticks with this, too. The lack of autofire has really been putting me off from playing some games.

This happened to me too. Never solved the problem.

For real? There's a version with autofire? Would be great to have that!

I also use that on one setup. It's just as good as the 7374!

Is the amp chip going to be a THS7375? I'm using a 7374 amp right now and while it's much better than without, I still think the output isn't high enough. Thinking of trying two 7374s in a row with pots, since I can't find any 7375 shipped quickly here.

Is there a way to remap directions as well, even in the sketch itself? There's a specific use case where I need to change all outputs and would like to use it on a Pro Micro/Leonardo, specifically for the Saturn version.

I rarely use mame and i can't figure out which roms inside the big SF2CE file are the M5 p roms. How do I find out?

I have a PC set up with CRTEmuDriver and it works. My Aero City cab is wired with a stereo amp with a 3.5mm input and works great with all my boards. Using the PC, I don't get any video at all on my Aero City cab unless I connect the audio from the PC to the stereo amp, which makes no sense...

Yeah that was also probably a factor. I had a 29F400TA and the XGPro software has it listed as 29F400AT. I didn't know that was the same thing. I kept selecting the 29F400T so of course it wouldn't work lol!

Got the carts to work! Unfortunately the board has some sort of color issue. The blue isn't displaying correctly. Did a memory check and Color Ram was NG, so I replaced one from a dead CPS3 and now it seems like two colors are swapped?! The capcom logo is blue and green instead of blue and...

Taito F3 works with GBS Control scaler FWIW.

I tried again, used my microscope to really align the chips onto the adapter and it worked! I got to erase and flash both chips, but after soldering them on, they're giving me the suicide screen. I tried a few different bioses now, I think it's my soldering at this point. thanks for the help...

Are you using a CRT Or a Scaler? I had this problem when using a CPS2 + Scaler + splitter on an Aero City cab specifically. I had to run the csync signal through a sync stripper to get it stable.

I just got my TSOP48 adapter and desoldered the chips off of my extra carts, but I can't seem to erase them. The programmer says Erase successful 0.021ms, which is too short of a time for that to really happen. Blank check says it's not blank. I'm new to this and I'm pretty sure I'm missing...

I wish 0xZero3 would make more! I still have to boot up emulators to get "Training Mode" for the other CPS2 games. Speaking of training mode on arcade hardware, some Dreamcast to Naomi ports of MVC2 and CVS2 would be excellent, too. That's literally all I use my Dreamcast for.

It's pretty simple! 1. Get the sfz3jr2 rom and extract 03 and 04. 2. Get the patch files and apply them using whichever program you like. I used Lazy-ips on Ubuntu. 3. Burn the ROMs and swap them with your CPS2 Zero3 or Alpha3 Roms 3 and 4. 4. Using an infinikey or Arduino, you need to set it to...

I also have a suicided board that does this. :( Would love to know if this can be solved!

Got this working on CPS2 using the SFZ3JR2 rom from the fba romset. I needed to change the encryption key to the Jpn version as well. This is a really impressive training mode hack!

I want to run the M5 hack on my CPS1 by burning some ROMs but I can't find the converted ROM anywhere. The only mention I can find was from posts by Drakon and the links on his posts are dead. Would anyone happen to have it? The FBA rom sets don't have the one that works on CPS1 unfortunately.

Thank you! I'll try that soon. I guess I'd better get to dumping these ROMs, anyway!