Search results

Pretty sure it’s a 1mm gap between the 3 “cover” and the 3 “base” parts (with the hex patterns). The bridge pieces have no gaps, those were the ones I was able to combine to single bodies.

I added a v29 fusion file with a combined body option for the support bridges (and STLs), that's gotta be a huge printer you are using. The cover/base panels themselves (with the hex grids) were designed with a gap between them so joining those bodies would throw off the hole spacing. Hope...

21.4mm, could be less if you use slimmer screws on top as well. I had to design that printed plexi for LE, I think you may be right, everyone seemed to put turtles or simpsons in these cases. I also have a SEGA System 16B in one, I didn’t listen when it said it was a Konami case.. 🤣

I picked up a Midway Vegas PCB a while back and found quickly that it's not really meant to run outside of a cab due to cooling and the multi-part pcb. To solve this I designed a case to hold the PCB and allow cooling fans to be mounted. This should support both Vegas and Durango CPU boards...

In case anyone needs it I designed a slimline case for the HAS extender, I had a need for it to be slimmer to fit into a case that I was using for my Lethal Enforcers board. https://www.printables.com/model/806976-has-jamma-extender-slimline-case

In case anyone needs it I designed a 3d printed case for this selector, specifically the 16B selector but it would likely work for the other system as well. Included is a holder for the ethernet jack in case you require to run wires to the DIP header on the multi instead of plugging it in...

I’m in for a set, thanks!

Thanks @RGB I got in an order, super exited! What are “external HAS adapters”? Would that be something like a 3p4p adapter?

I’m interested in one

That would be cool, I love the filament you used, I only had gray or neon green on hand, which didn’t look too bad but black or red would have fit better. I need to pick up something a bit more polished next time I order, these I mainly use for prototypes or small utility parts.

I believe the adapter remaps buttons on the jamma edge, which you don’t really want when the buttons aren’t all goofy like the original rom revisions were. This version I believe was intended to make the game playable on Japanese cabs that have a more traditional 4 or 6 button + start layout...

Just in case anyone else could use this, I designed some adapters for the original filter board to attach to the JNX Rage standoffs. I originally intended to use the JNX Rage but I realized it messes with the button mappings now that I upgraded to v2.3J, which "fixes" all the button issues and...

Confirm that your 12V power supply is outputting 12V. The card reader and sound amp run off 12V so if neither are working that’s likely the problem. I had this issue on my Blanc as well, neither worked, made sense once I realized they both ran on 12V. The monitors run on 24V, NA-JV2 IO on 5V...

I’ll take the RCA’s as well. Just let us know if we should pay the extra 20 now or at shipping time (for those that have already paid). Thanks for the awesome work here!

PM sent to preorder. The FOMO hit me on this one. Line level would be amazing if you can get that to work.

Is this a one-time run or will these be available in the future as well?

Or a shameless plug for the Darksoft MultiJVS as an option too, you can power that off the header on the Naomi and use DB15 connectors for fight sticks like you would normally use on a supergun, then just power the Naomi with an ATX PSU or Meanwell QP-150-3A and run video/sound to a monitor.

Naomi also requires 3.3v so you would need a separate PSU that supplies that. You can use a RT-85 to power the HAS with a SEGA JVS JAMMA IO connected for controls and power the Naomi directly with something like a Sun PSU or a Meanwell QP-150-3A. Video can be output in 15Khz with the proper...

I'll keep my order, no worries on the wait, sorry this happened! Just for curiosity's sake what laser model was it that self destructed, so we can avoid that one, and which laser are you looking at purchasing? I've been curiously looking at lasers, specifically since I found that diode lasers...

Much appreciated, I’ll check it out a bit more over the coming days, if I can’t get it going I’ll DM you.