Search results

Gorgeous - really wish I was stupidly wealthy right now :)

This is what mine shows.... the acrylic line is different - yours says modified, and mine I think is thicker? It's also possible that in the last 4 years prices have gone up... :/

I used these folks to do the Killer Instict one and they did a great job. https://www.ponoko.com/ It was $93 shipped, back in 2021. Matt

This looks great!!!

Looks brand new!!! Beautiful! GLWTS.

This is what I would recommend - I have had a rpi where the wifi hardware just died....

https://www.arcade-projects.com/threads/how-to-create-a-zero-key-pic-for-net-booting-and-cf-on-naomi-chihiro-and-triforce.6611/ Right in this thread - its a PIC16F628A Did a quick search on digikey - this looks to be the right one...

I can write one - do you have the PIC?

When you say you get no picture, you mean you turn it on and nothing happens? Perhaps you have the same issue I did when moving to cartridge to netdimm - while cartridges boot up almost instantaneously, the netdimm takes about 30seconds to boot up - so have you turned it on, and just waited a...

You don't need this board to dual boot KI1/KI2 - if you go back to the beginning of the thread, its fairly easy to get it going with off the shelf parts. https://www.arcade-projects.com/threads/killer-instinct-dual-board.5929/page-6 Neku should make it simpler and easier and prettier, but...

I would post this over in the Want to Buy forum. https://www.arcade-projects.com/forums/want-to-buy.23/

You can set up multiple readers on one rpi - I think @Franco23444 had 4 set up for his setup. Regarding multiple wipi's - I suspect there is somewhere where you can change the name of the device, but not sure offhand.

Yep - on a discord with him chatting about it - trying some different things :) Thanks!

Correct - I am using OpenJVS - not a MP07-IONA-US

You don't need the NFC card reader at all - you can just hook up the serial cable to the naomi and switch cards, etc. all through the web interface. @chunksin did a great job with the visuals for the cards - its pixel perfect! The NFC card is cool because you have something physical - but...

Grab the manual - its all in there!

@glstar go back to the first post and download from the google drive link... works like a charm with card reader emulation for Initial D1/2/3.

Thanks for this @ShootTheCore - that is the exact board I have, so seems easy enough!!

I think that @Franco23444 has dome some work on the driving boards? Matt

I was going to grab the CPS3 mobo as well (always good to have a spare) - but was beat out by the east coasters!