Search results

  1. imfuraisoth

    Sega Blast City refurb / guide

    Okay the final update. I made a video about the entire experience. View: https://youtu.be/WMfdjNVZeRY
  2. imfuraisoth

    My horizontal lines are blurry

    Yup that was exactly it. I adjusted it on the flyback and that fixed it. Thanks!
  3. imfuraisoth

    My horizontal lines are blurry

    Hi I need to configure my monitor and it just seems blurry. The verticals lines seem sharp but the horizontal lines are all blurred. Any help on how to configure this? I tried playing with the convergence rings and I can’t seem to fix the blurriness.
  4. imfuraisoth

    CPS-2 Custom Metal Case -Pre-Orders open now

    Is there a way to add additional port on bottom side of A board for HDMI out from digiAV board?
  5. imfuraisoth

    Nanao MS-2930 shutdown

    Did you ever figure this issue out? I recently recapped my monitor and now it's in a state where I can get it turned on for 5 minutes before it shuts off. Then it won't turn on again until the caps have dissipated their voltage. Where can I easily probe the chassis to figure out the B+ voltage?
  6. imfuraisoth

    Nanao MS-2930 doesn't power on

    Last thing I might do before sending it off is check the B+ voltage. Does anyone know which pin to check on the 2930? Is it off of the rgb15 1K resistor?
  7. imfuraisoth

    Nanao MS-2930 doesn't power on

    I’ll give him a call on Monday. Looks like he’s in Cali which is convenient for me.
  8. imfuraisoth

    Nanao MS-2930 doesn't power on

    I don’t think it’s the fly back transformer. It was working fine before I recapped it.
  9. imfuraisoth

    Nanao MS-2930 doesn't power on

    Can I just send the board to him and he’ll figure it out?
  10. imfuraisoth

    Nanao MS-2930 doesn't power on

    I'm not sure if anything is getting over heated. If that's the case, wouldn't I be able to turn it on again after letting it sit for a while? Only way I get it back on again is when I take it out and start switching out more capacitors. I've gone back and forth 3 times already. It would shut...
  11. imfuraisoth

    Nanao MS-2930 doesn't power on

    Okay so I went back to check on all the capacitors. I’m able to bring the monitor back on but then it shuts off after about 5 minutes or so. Any ideas why?
  12. imfuraisoth

    Sega Blast City refurb / guide

    I still haven't been able to get it back on. I've going to through to recheck all the caps on the monitor motherboard. Should all the negative terminals of the capacitors be grounded? I found a lot of them were not grounded. Not sure if it's supposed to be like that or not but I thought the...
  13. imfuraisoth

    Blast City Jamma problems

    I found this thread searching for answer to my blast monitor not powering up. I tried to use a multimeter on the power connector to the monitor to see if I even get power coming through and I don't think I am. https://wiki.arcadeotaku.com/w/File:Ms9pinout.png It even tried to undo the IO board...
  14. imfuraisoth

    Nanao MS-2930 doesn't power on

    Everything else turns on including the game and audio.
  15. imfuraisoth

    Nanao MS-2930 doesn't power on

    I actually just recapped those as well so next thing I’m going to do is check the work there as well.
  16. imfuraisoth

    Nanao MS-2930 doesn't power on

    I took a multimeter to the power cable coming in and I think it’s reading 0 for AC. There also seem to be no voltage readings on the board. So I think something is up with the power. The fact it turned on at all and was working for a little bit makes me think the monitor is okay.
  17. imfuraisoth

    Nanao MS-2930 doesn't power on

    Could I be that I need to reapply the gel to the anode? I don't know where I can get that gel.
  18. imfuraisoth

    Nanao MS-2930 doesn't power on

    Okay update, I went back and checked all my soldering and fixed some stuff and cleaned some of it up and plugged everything back in. It did turn on. I got a picture and I was ready to go and fix the convergence when it all of the sudden shut itself off again! It was on for about 5 minutes before...
  19. imfuraisoth

    Nanao MS-2930 doesn't power on

    I recently just recapped my Nanao 2930 in my Blast City. I believe I plugged all the cables back correctly but it doesn't seem to be powering on at all. Before I go back in and checking all the soldering of the capacitors, is there anything else I should be checking to see why it's not powering...
  20. imfuraisoth

    Sega Blast City refurb / guide

    Okay I finally tried to turn on the monitor and it did NOT turn on unfortunately. I believe I plugged all the cables back where they belong. I did not put the monitor back in the chassis but connected it outside because I want to fix the convergence issue with it. However, after powering up the...
Top