Search results

  1. Outside of Time

    NAMCO 246 - Soul Calibur 3 Arcade - Tried everything... can it be fixed?

    I had this same problem. The solution for me was the IDE cable that I had went bad. I replaced it and it still didn't work. Then, I got the bright idea to flip the IDE connector that connects to the motherboard around (notched side facing up). It worked like charm after that. I hope this helps.
  2. Outside of Time

    UD-USB Decoders

    @undamned no I have not figured it out. It seems the active P1 slot is preventing it from being able to updated.
  3. Outside of Time

    System 246 Help

    No sound. I guess that means it’s dead?
  4. Outside of Time

    UD-USB Decoders

    Yes, all the other outputs function as normal. It’s just the P1 slot is always on. Thanks
  5. Outside of Time

    Hello, from East TN

    Welcome. If you ever need help or have questions I’m located in Knoxville. So feel free to drop me a line.
  6. Outside of Time

    System 246 Help

    The game I’m running is soul Calibur 2 or 3. My voltage is off the jamma edge is 5.1 on my super gun and 5.0 in my cab. There isn’t any sound on boot up. Ive let it run for about 2-3mins. The weird thing is I can’t even eject the dvd tray unless I remove the ide cable and then the light will...
  7. Outside of Time

    UD-USB Decoders

    Hey @undamned I have two of your screw terminal decoders. One works fine and the other has a stuck Input always on @ the P1 slot. This occurred issue occurred after I updated it. I have attempted to troubleshoot the issue. What I have found is that no matter which wire I plug into P1 it will...
  8. Outside of Time

    System 246 Help

    Has anyone encountered this before? The DVD drive does not power on whenever the IDE cable is plugged in. Whenever I remove the IDE cable from the DVD drive the DVD drive will power on. There is only a black display coming from the 246 rev B. I have attempted to remedy the situation to no...
  9. Outside of Time

    Hello from Atlanta, GA!

    Welcome to the wonderful world of arcade ownership.
  10. Outside of Time

    Big Karnak Graphical Issues

    Ok, thanks for the info @nem. My eeprom programmer crapped out on me. I'm going to borrow a friend's. I'll post the results when I get the programmer.
  11. Outside of Time

    Big Karnak Graphical Issues

    I pulled this board out of storage (stored in a cool dry anti-static bag in a card board box) and when I powered it up I was greeted by graphical errors. The error seems to be on character sprites. When in test mode every thing passes. I am unsure as to where to begin to solve this issue. Here...
  12. Outside of Time

    Egret 2/Windy 2/NNC/Q25 (Repair refund)

    Will there be a live stream? Asking for a friend.
  13. Outside of Time

    Aloha from Honolulu!

    Welcome!
  14. Outside of Time

    Finally, multi System 16B (Sega)

    Hey @brizzo let me know if/when ever you start unloading those golden axe boards. I could use one for this multi. I appreciate it. Take care
  15. Outside of Time

    CPS2 input issue

    I think it may be an issue with the undammed controller converter. I had a similar issue with my setup. However my super gun is an old super nova not a HAS. When I updated the firmware on my UD converter one inputs was continuously on. It was remmedied by updating to a newer firmware. UD-USB...
  16. Outside of Time

    Hi from CA.

    Welcome!
  17. Outside of Time

    Hi from Italy

    Welcome!
  18. Outside of Time

    My Capcom Big Blue lives!

    That restoration looks great! Good job man!
  19. Outside of Time

    Home Arcade System

    I would like to be added to the next round of pre-orders if you don’t mind.
Top