Search results

  1. LWK

    Sega Megalo 410

    No, projecting on a mirror.
  2. LWK

    Sega Megalo 410

    Film installed. The glass is tinted, and the film was black. Had to bump the brightness. I'll be honest. I sort of wanna swap out my benq for a better condition one anyways, but I could always go grey, but ugh, it's just a endless pit of work. Might be time to settle for the time being.
  3. LWK

    Sega Megalo 410

    Update: I ordered the film that you attach to the glass via water. I ordered black. Tiff_Lee had done a test with the samples on the previous page. I also wanna see how this goes. After this is done and I get a better power supply for this cab. My project is essentially done. At that point, it's...
  4. LWK

    Sega Megalo 410

    It's been some time, and I am nearing the end of this project. I even have and original marquee now. Got some jumpy screen issues with the gonbes. Any other RGB>VGA converters out there? I also want to drop the rear projection material and go with the black adhesive. I literally just tape it to...
  5. LWK

    Need the name of these capacitors..

    Extra thanks Kujako. I installed the caps tonight, I'm 100% again.
  6. LWK

    Need the name of these capacitors..

    I need like two. This was a EXCELLENT help, thank you so much.
  7. LWK

    Need the name of these capacitors..

    Okay, so the rating is 223. I read some things and saw a video. I think this is what I need, but it has been discontinued: https://www.mouser.com/ProductDetail/Murata-Electronics/DSN9NC51H223Q55B?qs=LSvAQ5kvDJE3KYc3%2BMOy5Q==
  8. LWK

    Need the name of these capacitors..

    They are from a CPS2 B board, they are labeled as ESXC. They have three legs. Not sure of the exact name. Need to order a few.
  9. LWK

    Sega Megalo 410

    Installed a new mirror. Lowe's cuts these! My dimensions are not traditional at all for this. I just have the back portion holding it snug. Used three layers of double sided tape in three area's, and two at the bottom. I mounted the mirror completely different from how it works in the cab. The...
  10. LWK

    InfiniKey-CPS2

    Swapped for another Key. Fixed it. I messed up the other.
  11. LWK

    InfiniKey-CPS2

    Have a weird issue with a X-Men Cota. I installed infinikey's in other boards and they work fine. This particular board though is a mess. It'll work, then green screen when I power it. I removed EXC1 & EXC5 completely. I took off the electrolytic cap and then soldered it back in. This particular...
  12. LWK

    Sega Megalo 410

    Ended up breaking the mirror trying to cut the other side to match. I screwed up and left the plastic side one piece and applied pressure with it and it snapped. I then cut across trying to rectify that, but I didn't have enough mirror after that mistake.. I need a better dimension next time and...
  13. LWK

    Sega Megalo 410

    Mirror has been resolved. I installed a mirror in it, and I am showing here how I did that. I used double sided tape. I made some brackets for it with some old bracket metal. The double sided tape holds the mirror in at the bottom. Even if it failed, it'd still sit in there! I have some the...
  14. LWK

    Sega Megalo 410

    I need to figure out how to place the mirror. Mine is the one that goes slightly under the top of it and over at the bottom portion of it. It's a nightmare and it needs to be right so I know how to finally mount my projector. I already have it screwed to a stand. Thing is, my cab does not have...
  15. LWK

    Sega Megalo 410

    I got my screen showing. Looks bad because the light doesn't disperse across it, making it uneven.. So the fresnel was necessary I guess. Anyone know of something I can tuck behind the screen to make the light fill the entire thing? I don't have a actual mirror in, this is just a house mirror...
  16. LWK

    Question on using Appliance Epoxy Spray Paint

    I haven't painted CP's for that reason. I am actually gonna avoid that. It's definitely a annoyance when painting.
  17. LWK

    Question on using Appliance Epoxy Spray Paint

    For the Super Neo 29.. Nah. They are unified with the entire plastic bezel.
  18. LWK

    Question on using Appliance Epoxy Spray Paint

    I didn't prime or even sand the Net City. I sanded the Super Neo 29 parts though. I used wet toilet paper and paper towels to jam into the edges of the top bezel for the Super Neo 29 speakers. I used the back of a razor blade to push the towels down on the sides, so it wouldn't bleed over the...
  19. LWK

    Question on using Appliance Epoxy Spray Paint

    I am floored with the results. I love this paint. I need to see over time how good it has held up. Look at this finish. This is without any final polishing yet. (I may not bother at all) Look how good this looks. I did net city with no sanding. Used 50 proof alcohol, and wiped it down, used my...
  20. LWK

    Question on using Appliance Epoxy Spray Paint

    Thanks for your input. The reason I wanna use this is due to this thread: Sega Net City I am just not sure about sanding. Thanks for letting me know about the priming!
Top