Search results for query: *

I have the cart and after dumping it and running it in MAME I do not see Akuma. Custom code install on the simm?

It's more or less at a halt for the time being. I have to go through our current stock. I know we are out of the no hole gundam stick variant

Being 3d printed there is always a risk due to the cut out of the keys. If the key is fully insert and you don't force it, if the lock is jam/seize. You should be fine, but time will tell. From the handful that I sold I had no concern about that yet. The only one I would keep an eye on would be...

I am selling 3d printed repro of the following keys: Sega 5380 5382 Capcom P5001 P5002 Price is as follow in USD: 1 key = $12 2 keys = $22 3 keys = $30 4 keys = $36 Shipping is as follow in USD: USA = $8 France = about $15 I am currently at revision 1.2 and the keys are dark green in...

Thanks for the feed back. I can also do 5382 and Q25 P5001. I have a P5002 lock on the way so I could do those to

I Have a small initial batch of 16. Price is in USD shipped to the US 1=18 2=28 3=32 4=40 @Bad_Hambre @Kidkaos @erdrick1980

Oh good to know.

I think those use the 5575 dimple locks

I could, to get a rough idea. Being magnets I guess I don't have to be precise

Interesting mine is a P5001 key

The Q25? Let me think about that for a little bit. I only have 1 key so I'm not sure I want to dismantle it

Sale of the keys are now in its own thread HERE

Interesting mine doesn't seem to give that option. I can only can select input

Yeah I saw your post. I manually test each led and each of the 4 segments just to make sure. The odd thing is I have 4 that does the same thing. I have yet to replace the led on the other 3, but they test good on my tester. My guess now is it's the rtd2482 I can't find a data sheet on it but I...

I got a led tester and even Replace the strip just in case. I must have a new revision as I only have led on one side. I just have the monitor, I'm helping someone else out. With the control board that I have all I can do is select input (vga/dvi). If I power the led from my homemade psu all...

Does anyone repair lcd monitors? I have a maimai/initial D monitor that flash on for a second. Led strip test good and I have replace the driver board (was sold as working). The BLO only get 3.3VDC for the second the BL is on.

512 and it does have a zero key

The production on the banana is slow going due to life stuff. I'm just going through our current stock of mostly original shaft and gundam shaft with dummy holes. The list is long. Most of the pre-orders been ship out minus 1 or 2

Type 3

Place holder