Search results for query: *

Been trying Gundam vs Gundam NEXT on the same 8GB CF I have had success with, but with this one the game doesn't fully boot -- hangs at BOOT 02 message. Fate Unlimited Codes was doing similar when it was on too large of a CF card, which makes me think maybe the IMG file I wrote to the CF card...

I've only tried so far: Fate Unlimited Codes - played fine Ace Driver 3: Final Lap - need to setup my IONA-MP07 JVS I/O to something that matches this game MotoGP - same as Ace Driver I have a 246B and a 256, both with JAMMA(B) I/O boards as well as an INOA-MP07 with some custom maps. I...

I'm interested in one, don't care if HDD is compatible or not as I worked out a solution with a CF reader for HDD games. The Toshiba DVD-Rom on my 246B is starting to show signs of failure, this is my second one so far. I'm pretty sure we are the ones buying all of the compatible IDE DVD-Rom...

Hello, so as the title states, I have a 27" WG D9200 which works great in 31khz VGA mode, but when I switch it to CGA 15khz, the sides are way stretched out. I tried adjusting the H sync pot in the middle of the board but when it brings the picture in, the image then distorts the sides to...

Following up to say , SUCCESS!! 8GB SanDisk CF I used: https://www.amazon.com/dp/B0017QHZ86?ref=ppx_yo2ov_dt_b_fed_asin_title I was successful on the first boot using the StarTech 35BAYCF2IDE , the third one/far right in my picture a few posts ago, set to Master on the Master IDE end...

I'm confused --- what do you mean changed the file name to just civ.bin? It should have been civ.bin all along, that must be why it wasn't deploying before. When It's deployed, it's done and out of sight... you wont go finding a civ.bin file that was moved anywhere. You also do not add...

Yes, the red led stays on constantly. I'll try to source an 8GB SanDisk CF card soon and see. I also just ordered a ZuluIDE adapter... It was a bit pricey but if it works, it may be a solution for a few projects I have that need an IDE device

With that one, if I select Master on the jumper, the green LED flashes very briefly, maybe less than a second, then no activity. If I leave the jumper off, assuming that's the Cable Select undocumented feature, the green LED turns on for longer than a second, maybe 2-3, then no activity. Same...

I used an 80-conductor cable with 3 ends, hard drive connected to the black/master connector, and jumper set to Cable Select. I also tried with an 80 conductor cable with 2 ends, it worked fine as well. When I tried with the adapters, I tried them all with jumper set to master and on the...

Looking for a US board , -6 revision of possible This is what the board looks like before and after I cleaned it up

I have a board, no case. HDD mount would be a bonus

I have a CPS2 Marvel vs Capcom with a badly leaked battery -- ate away the legs on one of the big chips near it, safe to say the pcb is lost unless. The ROMs are fine, and I have spare Infinikeys ... just looking to bring this MvC back to life.

I had this issue with a questionable CF reader,... original Sega model CF reader, but looks like it was repaired at one point with new caps. Also had this happen with bad/dying CF cards. This one, I had happen to me when I tried to use an ATX power supply on a Naomi that was using a CF...

firmware and civ.bin are not at all part of the same process. firmware, you're holding a button on the sd2psx before plugging into your computer so that you can read the memory space on the sd2psx card (NOT THE SD CARD) and copy the firmware directly to the devices storage system. Again, not...

Same results, no differences. I even bought a SD to CF adapter to round out the holy trinity of adapters I have acquired for this project, doesn't work either. Summary, SD to IDE: No CF to IDE: No SD to CF to IDE: Nada MicroSD to SD to CF to IDE: lol For sanity I imaged a 80GB IDE Western...

So none of my IDE cables have any lettering on the ends that say Master or Slave. I know that 80 conductor IDE cables, the ones with the blue motherboard header, have a grey and a black end... the grey is slave, the black is master. 40 conductor IDE cables dont have any color coding on the...

When I download the compressed .gz file from here archive.org/download/system2x6/ and extract the iso to burn, seems that I've had issues with those files and the solution was to go to a extracted chd version

Ok, I can try that, I have multiple types of IDE cables. When you say a 'straight' cable, do you mean a 40 pin - 40 conductor? or just one with 2 ends as opposed to 3? I've been using 80-conductor cables all this time... and I also tried reversing the connection by putting the blue IDE end...

Hmmm, interesting. I've done extractcd and burn them at the slowest speed my blank disc allows... 4x for dvd and 16x for cd, all of them have worked fine. It's when I extract the iso from the System2x6 directory that I find issues with the game

is there a version of chdman that offers extractdvd? I've only seen extractcd. Using extractcd works fine for other dvd files I have extracted. Super DBZ is DVD, Baseball is CD