Search results for query: *

Three years after the fact, and I finally sat down and finished mapped everything out. Enclosed in the .zip is my spreadsheet which includes info broken down by track (1,2,3), hex position, and the notes on character limits, calculations, etc.

Hey MetalliC thanks for that. Well that is helpful to hear, I appreciate it.

Sounds good, it does indeed work with all DOCWE versions (Rev A; Rev B; Rev C; and Rev D); only one not working is DOC2000 Version 2. Which used the AR version Sanwa vs the BR used in the DOCWE versions. I would assume that DOC99 is the same as DOC2000. Does anyone have a simplified list of...

Same issue, I think it’s because of the different prefixes to the commands that were changed in the BR version of the Sanwa. It looks to my rapidly aging eyes that the Naomi uses 3F 3F before the request and the Card Reader is responding with 3F 81 then say 02 06… etc. I am going to try to...

Okay, I think I had a solder joint that wasn't as solid as it should have been on my cable. I also reset the game to a US version that I know has been proven working with your software. Got it up and running, I appreciate the set of eyes! Now to convert this machine to JP version try over...

Thanks for the response, I have tried your program, and it is possible that maybe I am not setting it up correctly? I did. This is what I got for the config file: [config] ;basepath = /home/wutno/cards/ basepath = C:\Users\18082\Desktop\YACardEMU\ ; Linux ;serialpath = /dev/ttyUSB0 ; Windows...

Noticed the majority of what I have been re-reading is in hex. So here it is in hex as well...

Sorry to double post, but the pics of the hang up were on my phone.

Sorry to come out of left field and re-direct the train, @whatnot is there any interest to add CRP-1231 AR-10 support to YACardEMU at all? This was the reader that worked with the early versions of DOC. In the beginning pages of this thread, @MetalliC was trying to figure out the...

While I apologize that this is likely not the place to ask, but does anyone in here still monitoring the thread happen to have an old Sanwa Newtec CRP-1231 AR-10 card reader/writer laying around?

Of course, I figure the more info the better! I do indeed have a setup at home.

Never mind, I think I figured out what the game is doing finally!

So I finally had some time to fiddle around with everything again. Any idea what is going on with "Track 3", "Track 2" and "Track 1" line up perfectly as inversed, but that "Track 3" is a bit of a mystery to me. Maybe I am just not seeing it? I want to take a shot at updating...

Well, I stand corrected... Best right's internals (Rev C) are not as high as I (and the DOC community) had initially thought. Confirmed he is at 31 (ST) 53 (SP) 51 (SH). I found the data for the CPU horses. Just formatted a bit differently than the Sires and Dams. Located in the blocks of...

What I am also struggling with is where in the code the other horse data is found? Perfect example is the horse "Best Right", that we used to use to test the internal values of our new horses against before we had the reader. The horse names are found in the code (Rev C) on "epr-22336c.ic22"...

ST = 39 SP = 19 SH = 34 Dirt (How well horse runs in bad race conditions or dirt tracks) = 240 (Races Found in Game) = 0 Horse Color = 224 (Markings or Hood ?) = 17 Horse Type = 240 Start = 15 Corner = 3 Out of Box = 6 Competing = 10 Tenacious = 4 Spurt = 12 Horse # = 1 (Races Found in Game) =...

Sorry, I usually have to read these a few times. So we can effectively run a machine without a reader, as long as we are running software that allows us to feed the card data at the appropriate time? Pretty much the same way they do it with ID3 and so on? So basically, what exists needs...

Wow! That is awesome… holy shit (excuse my language)… On to the next!

I can hook up Rev D and test if we need. I have both main boards and carts for EX as well. What I’ve seen over the years of card scans is that it has different max values for horse internals. Or total internal value before it handicaps the horses. I can set it all up tomorrow if need be.

This is what I can see on my end... I am using DOC Rev C or DOCWE not the EX (Rev D)