Search results

  1. telecommand

    UD-USB Decoders

    Hello - can anyone please confirm if the UD-USBs work fine with the Brook Retro board? Had a search around but couldn't find the answer.. Putting one into my fightstick so just checking if I need to also put in a Brook UFB to use with the UD-USB, or if the Retro board will be fine on its own...
  2. telecommand

    Home Arcade System

    Question! I'm planning on grabbing a SEGA Naomi system with JAMMA IO converter. What's the deal with power etc. when hooking this up to the HAS? Since the board + GD-ROM has its own power supply... do I need to worry about anything in terms of the power that's supplied via the JAMMA connector...
  3. telecommand

    Home Arcade System

    Can anyone confirm if the HAS is safe to use with the gscartsw? Planning on getting one and there's a massive warning on the store page to not use it with superguns... I'll probably just leave my HAS out of the setup to be safe but I'm wondering if he's just talking about the cheap superguns...
  4. telecommand

    WWF Wrestlemania - Revision differences?

    Tested and no problem on PCB. Match started without issues :thumbup: Also tested with one of the players as Doink and works fine.
  5. telecommand

    WWF Wrestlemania - Revision differences?

    Ohhhh I see what you mean. I thought you meant the co-op mode. I will test tomorrow when I get a minute and report back :thumbup:
  6. telecommand

    WWF Wrestlemania - Revision differences?

    Is that even possible? I thought the buddy mode was only possible in 2P games, so both characters would be player selected?
  7. telecommand

    WWF Wrestlemania - Revision differences?

    Just tried. Haven't been able to replicate this issue on my PCB.
  8. telecommand

    WWF Wrestlemania - Revision differences?

    Just performed Undertaker's fatality! So confirmed not new for 1.30 :thumbup:
  9. telecommand

    WWF Wrestlemania - Revision differences?

    I'll give this a go over the weekend! Wish me luck because I'm terrible at this game! (Although should be easy if I just rig up a 2P game)
  10. telecommand

    WWF Wrestlemania - Revision differences?

    Just received a WWF Wrestlemania PCB which is showing rev 1.20 8/2/95 I understand there is a 1.30 out there (seems to be what everyone is playing on MAME etc.) Are there any differences in the revisions I should worry about? Are they just bug fixes mostly or do they add something major I'm...
  11. telecommand

    Home Arcade System

    Thanks for that. I think I have what I need. Can you confirm this is right? Molex 15-pin: https://www.digikey.co.nz/product-detail/en/molex/0010112153/WM2687-ND/1643310 Pins: https://www.digikey.co.nz/products/en?keywords=0008550102 HAS-side connector...
  12. telecommand

    Home Arcade System

    I think I am going to have to make a longer kick harness for my Wrestlemania board I just bought... @RGB what are the connectors/part names used for the HAS CPS2 kick harness? What wire gauge do you use? I bought a CPS2 to Midway adaptor from JNX. I didn't realise how far away the kick harness...
  13. telecommand

    WTB: WWF Wrestlemania The Arcade Game (FOUND)

    No longer required - I have found and bought one :)
  14. telecommand

    Home Arcade System

    Is the DB15 controller connector pinout on the HAS standard or has it been modified? I'm picking up a couple of these terminal block adaptors for a custom control panel I'm building and I'm wondering if I'll have to worry about mixing the wires around if they don't match up (no big deal if I...
  15. telecommand

    FT: Rampage World Tour

    Is this still up for trade? I have a D&D Shadow Over Mystara CPS2 board (with artwork) I'd be willing to trade if you're insterested?
  16. telecommand

    Bought my first Model 2 board and I have no idea what I'm doing! Please help!

    Yeah, I figured there would be gun problems if I go the converting route... Right, so the hunt for a monitor begins!
  17. telecommand

    Bought my first Model 2 board and I have no idea what I'm doing! Please help!

    So if it's not compatible (I've tried to confirm this but can't find a definitive answer,) am I looking at using the GBS-8220 to convert the signal to VGA? Haven't looked into it much yet but I saw this...
  18. telecommand

    Bought my first Model 2 board and I have no idea what I'm doing! Please help!

    I bought a House of the Dead board set! :D I have no idea how all of these parts connect up! 8| Please help me! This is what I bought - currently on its way to me now: I understand how the main board connects to the I/O board. Pretty sure the top-right PCB marked "1." is the gun + video...
  19. telecommand

    Home Arcade System

    I'm not sure if this is the right place to be asking this, but I'm looking into buying a House of the Dead kit (SEGA Model 2C) and I'm wondering how to go about hooking this up to the HAS etc. edit: Upon days of research I think I know how I need to go about this now. Disregard :)
  20. telecommand

    [FS] JAMMA extension harness

    Been using this for a while now and it's great to relieve some of the pressure from the JAMMA connector (by not having the HAS hang off the board itself.) I'm pretty new to all this stuff so bear with me, but I'm wondering about the voltages and what is safe/unsafe/may cause issues...
Top