Search results

  1. Franco23444

    Namco 246 - Bloody Roar 3

    That’s weird, it might be a bad disc file, I do have one that I have converted and works fine.
  2. Franco23444

    Namco 246 - Bloody Roar 3

    Try a different disc drive?
  3. Franco23444

    Namco 246 - Bloody Roar 3

    probably your dvd drive doesn’t have good CD compatibility or is missing? I have gotten the game to work with various dvd/CD drives I have. Here is a video on how the game should boot up. I am using a burned CD and the multi dongle to play this game. Sorry if I’m spamming my videos but my video...
  4. Franco23444

    Namco 246 - Bloody Roar 3

    Yes, I have gotten this game to work on both my 246 B and C units. The thing is that this game is also dvd/CD drive specific. The rule is that if it can run tekken 4, that dvd drive should work. I know that you are probably using the ODE but it should work. I’m not sure if the ODE has CD...
  5. Franco23444

    OpenJVS - JVS Emulator

    I actually found and saw the video, I thought it was so cool! I see that you are using a Wii sensor bar? Would it be easier to use a IR camera with a IR led transmitter inside the gun? Just like the V221 MIU and Rays pcb? I have done some testing around with those pcbs, I made a custom IR gun...
  6. Franco23444

    OpenJVS - JVS Emulator

    @bobbydilley, awesome!!! I did make a USB adapter for my time crisis 2 pcb as I use the time crisis 3 wiring loom instead of making a new wiring harness. Can’t wait for more!!! :) Just in case I can’t find the video your are mentioning, can you send me a link? I would really like to see it.
  7. Franco23444

    WTB: Mortal Kombat 1 sound board

    They are the same but the cable is the different. They are ,in fact interchangeable. I have a Y unit soundboard power harness.
  8. Franco23444

    WTB: Mortal Kombat 1 sound board

    A Y unit pcb
  9. Franco23444

    WTB: Mortal Kombat 1 sound board

    Still looking for one…
  10. Franco23444

    Time Crisis 4 gun harness pin outs and what I/O board is needed

    Ok, I was able to actually get the leds on. My other gun sense pcb arrived yesterday and I was able to test it. Now, I haven’t tested the gun sensor yet. I’ll get to it hopefully today. I’m working at the moment. I also need to get some screws for the gun and make a 32”-40” bezel for the IR led...
  11. Franco23444

    Crisis Zone IR led replacement tests - Work in progress

    I have already tried reflowing both SH-4s and it would work, until the they cooled off (until I shut the pcbs off). There seems to be a different issue somewhere else. Just to check if it was an issue with the 33.33mhz oscillator crystal things, I replaced both of them, even putting new 10 ohm...
  12. Franco23444

    Crisis Zone IR led replacement tests - Work in progress

    It’s ok, I know the earlier rays pcbs have this booting issue. I am able to get them to work as long at the processor chip heats up first. About that thing that the manual says, I don’t think that the gun matters and they both seem to have the same gun sense pcb. I tested crisis zone with both...
  13. Franco23444

    Crisis Zone IR led replacement tests - Work in progress

    I got the gun from a Chinese seller that I usually buy my stuff from. Really good price as well. It’s not in the best condition but it works for my purposes. I plan on mainly making these for people who would like play these types of games at home, specifically Crisis Zone. I might actually mold...
  14. Franco23444

    WTB: ninja assault I/O pcb V222 JYU gun pcb

    Hello, I am looking for a ninja assault gun I/O board aka the Namco V222 JYU gun pcb. If anyone has one for sale, I’ll be glad to buy it from you.
  15. Franco23444

    WTB: Mortal Kombat 4 PCB

    I got one but it has one issue, the test menu freezes up, so settings can’t be changed. Everything else plays, sounds and looks fine.
  16. Franco23444

    Crisis Zone IR led replacement tests - Work in progress

    If anyone is interested, I will start doing a limited run of reproduction IR guns. Just DM me if you’re interested. Will probably take some time to make as I’m still in the testing stage. By far the easiest way to play the arcade version of Crisis Zone, Time Crisis 3, and Vampire Night at home...
  17. Franco23444

    Crisis Zone IR led replacement tests - Work in progress

    Here is some gameplay on a 32” Samsung flatscreen LCD. Works extremely well. I wish I had the real gun but this substitute works fine for now. I will do some further explanation on how to build your own gun. On another post, I showed that Time Crisis 3 works. Vampire night works, but with mixed...
  18. Franco23444

    Can someone burn some eproms for the Namco V221 MIU I/O PCB?

    Hello, I’m actually wanted to know is someone has the eprom files for vampire night and time crisis 3 V221 MIU pcb. The same I/O pcb that Crisis Zone uses. I know that vampire night and time crisis 3 are compatible with that I/O pcb (my rays pcbs are having boot issues and I don’t know how to...
  19. Franco23444

    Anyone here seen Time Crisis 3 working with CCD gun?

    I got it to work! Works well on my 19”IPS LG monitor. View: https://youtu.be/MNvu82AxPKE
Top