Search results

  1. F

    JVS I/O Drivers for Windows 10

    Thanks, I have one of these too but I think it will have to do for now. Thank you for the confirmation.
  2. F

    JVS I/O Drivers for Windows 10

    Is it possible to use a JVS I/O board with Windows 10 for emulation? If so is there a way to pull drivers for use with Windows 10 to communicate directly with JVS and whatever emulator is to be used?
  3. F

    Lindbergh to Ringedge AC Adapter?

    For lindbergh, you can use a standard ATX PC to power the Lindbergh. The Power Supply for the Lindbergh is an external PSU. The RingEdge has an internal PSU, I believe the thresholds are the same as in the US (not sure) where you can plug the RingEdge directly to the power source. I believe...
  4. F

    FS: ID5 Single, ID2 Twin Cab Only, WMMT2

    Looking to sell a few of my cabs that are in storage. I no longer have room to set these up and would like them to go to someone that will take care of them. ID5 Single Cab: Will come with Lindbergh and ID5. The cab will work with ID4, ID6, ID7, ID8. It can work with ID1-3 with a minor...
  5. F

    A Freeware Taito TypeX2 Multigame.

    1GB. It's the same stick that came with the console.
  6. F

    A Freeware Taito TypeX2 Multigame.

    Unfortunately, I do not. Do you have a recommendation of what alternative I/O I should use to test or should I look for another Rev B to test and confirm? I am reloading another 2.0 image to make sure I did the image properly. I found that when I tested one game, SF4 2012 Patched, the screen...
  7. F

    A Freeware Taito TypeX2 Multigame.

    Thanks all. I was able to figure it out by posting my question on here. I ended up re-wiring my harness and there was a cross connection between my 1P SW1 and 1P SW3. After testing continuity, these two switches ended up being connected. My Multi 1.4 works again. However, I did find that...
  8. F

    A Freeware Taito TypeX2 Multigame.

    Model215A. I'm not sure it's a FastIO card but its the JVS that comes with my console. (Circled in red, this is just a sample image but similar to mine) I think I need to rewire the whole harness to make sure I'm not missing any connections. Should Ground be shared between all switches...
  9. F

    A Freeware Taito TypeX2 Multigame.

    This probably doesn't help much. I will probably have to tear out the JVS and trace the wires properly to get better pictures. Which ground on the JVS I/O should be used for the switches/buttons? It's a little hard to take a pic of the wires as they are inside the cab but here are some images...
  10. F

    A Freeware Taito TypeX2 Multigame.

    I'm using a Sanwa 5 pin joystick. UP: Pin 18 DOWN: Pin 19 LEFT: Pin 20 RIGHT: PIN 21 LP: Pin 22
  11. F

    Compatible hard drive options?

    Try looking for the Hitachi Deskstar 41.1GB Hard drive when you run your installation. I have had luck with Maxtors as well but the Hitachi 41.1GB drive gave the best results.
  12. F

    A Freeware Taito TypeX2 Multigame.

    Not really too familiar with that acronym. I'm hoping my mappings are the culprit. I found it odd that when I was running 1.4, the P1 directional keys worked, popping in the 2.0, now they don't.
  13. F

    A Freeware Taito TypeX2 Multigame.

    Can anyone direct me to the post number that can help me troubleshoot an Issue I have with version 2.0? I came from version 1.4 and am using JVS I/O Rev B 838-13683-93 board. For some reason, when I get to the game select menu, I choose the game then press the Player 1 LK button and it takes me...
  14. F

    NAOMI 2/Chihiro/Triforce Card Reader Emulator (Initial D3/WMMT/Mario Kart/F-ZERO AX)

    What kind of updates are you referring to? @winteriscoming has all the files necessary to run the emulator on post #1 in this thread.
  15. F

    Taito Type X2 - Replacing turbine fans with silent fans

    You can find them on Amazon or eBay for relatively cheap. https://www.amazon.com/Scythe-Mini-KAZE-Silent-SY124010L/dp/B000LB0M8S/ref=sr_1_6?keywords=40mm+case+fan&qid=1575362730&sr=8-6 The Noctua's aren't bad either.
  16. F

    NAOMI 2/Chihiro/Triforce Card Reader Emulator (Initial D3/WMMT/Mario Kart/F-ZERO AX)

    What if you had a 'key'? So let's assume you have multiple users playing. Before your script starts, could you load a user profile, this way if the user profile matches, use the same card, if it doesn't, you create a new temp card? Or will the timing on the card load script not allow this...
  17. F

    NAOMI 2/Chihiro/Triforce Card Reader Emulator (Initial D3/WMMT/Mario Kart/F-ZERO AX)

    @winteriscoming might be able to confirm but I think the emulator was only designed for specific games (ID1,2,3 WMMT1/2, F-Zero, MKGP/MKGP2)
  18. F

    Initial D Stage 6 AA Card Reader

    What do your DIPs look like? Can you confirm they match what @winteriscoming is reporting? This is what mine are set to and they both use the same hardware, I just swap out the PC. Card Reader and other hardware remain unchanged. Lindbergh Multi (TOP): OFF OFF OFF ON ON ON OFF ON RingEdge...
  19. F

    Initial D Stage 6 AA Card Reader

    Try this, load ID4 and get to Attract Mode. Then press the Test button to get to the test menu. (Don't go directly to the test menu from the multi menu). Check to make sure the card reader is enabled in test menu. Run a Read test or something to trigger the card reader. I'm almost positive...
  20. F

    Initial D Stage 6 AA Card Reader

    ID4 / ID5 / ID6 / ID7 / ID8 all use the same model card reader. CR-2PR-10H-SG. There may be other models but this particular model comes with ID5 and ID8. What error are you receiving when using the card reader on the Lindbergh? What game are you trying to play to use the card reader?
Top