Search results

  1. kasaski

    Console JAMMAizer! Easily connect home consoles to your JAMMA arcade cabinet.

    Yep it works perfectly for that, great upgrade to a something like a jpac because it also routes audio through to the jamma edge. It doesn't perform any downscaling so you'll of course need to configure your PC to output 15khz and/or 31khz
  2. kasaski

    Console JAMMAizer! Easily connect home consoles to your JAMMA arcade cabinet.

    I did some testing, at 31k the image seems fine, nice and bright. At 15k the image is pretty dark. I've pumped up the brightness almost to max and put contrast down to just below halfway and the image seems okay now, good enough while in game, I think I'm just being picky. It's probably just the...
  3. kasaski

    Console JAMMAizer! Easily connect home consoles to your JAMMA arcade cabinet.

    Anyone use this for mame with a weiya m3129d? I can adjust it to look pretty good, but im getting brightness/contrast fluctuations depending on the image. Anyone know anything i can do to fix this? Disclaimer: I made this one myself from the files Arthrimus posted on github
  4. kasaski

    JNX Namco System 11/12 Kick Harness Adapter

    Just grabbed the one on your ebay store :thumbsup: thanks
  5. kasaski

    Noisy 246 image

    thanks for the info, that should help point me in the right direction
  6. kasaski

    Noisy 246 image

    Recently picked up 2x 246s with some image noise issues, like a faint line pattern that slowly rises upwards on the screen. One works well enough while playing, I only really notice some noise while in the service menu on the grey background. It's not really an issue on that system but the noise...
  7. kasaski

    MV1FZS glitchy background graphics + audio

    Hey all, After finally repairing my mv1b I'm putting some attention into my other broken board. This one is much worse and has a few issues. Ive already tried a few things but now im lost, so this is a post last ditch effort to see if I'm missing anything, and hopefully document any repair for...
  8. kasaski

    Need some help with Neogeo MV1B Vertical lines

    In case anyone else comes across this with the sasme issue, and cleaning contacts doesnt work, I finally got around to swapping a ZMC2 from another dead board onto this board and now its working perfect :)
  9. kasaski

    WTB CPS2 Donor B Board

    I've had a set of original roms sitting around for a few years from a board that had its battery blow up while shipping, which killed the custom chips. RIP rev7 board :(. I was hoping to grab a working but bare b board so I can do a rom swap without having to sacrifice another game. I don't...
  10. kasaski

    [Found] WTB Naomi 1 or 2 motherboard

    ended up finding a cheap one from japan that im combining with some other imports, thanks guys :)
  11. kasaski

    [Found] WTB Naomi 1 or 2 motherboard

    Recently got a decent deal on a netdimm for netboot and capcom I/O, just need a motherboard now :D Looking to pick one up from someone within Australia for cheaper shipping but if the deals good enough I dont mind paying for international post. bonus points if it includes a multibios and atx to...
  12. kasaski

    PGM single game PCB interest check

    Hey Fluffy, I'd be down for 3 sets for the next run :)
  13. kasaski

    Need some help with Neogeo MV1B Vertical lines

    Nope, only the Neogeo text Logo has the lines, snk logo looks good
  14. kasaski

    Need some help with Neogeo MV1B Vertical lines

    tested all pins and they all make contact with the cartridge :(, 99% sure its a bad zmc2. i'll probably just look for another board, this one didnt cost my much at all.
  15. kasaski

    Need some help with Neogeo MV1B Vertical lines

    ah my guess that the zmc2 is bad is probably right then. That's a shame :(
  16. kasaski

    Need some help with Neogeo MV1B Vertical lines

    I recently received a MV1B 1 slot and I'm having some issues with vertical lines on some sprites. I'm a complete noob in fixing these things and was hoping to get some direction from more experienced users. After researching a bit it seems to be usually caused by a floating/shorted c rom trace...
  17. kasaski

    Australian Roll Call / Registry / Deals Thread

    hey just saw this 1. kasaski 2. Melbourne, Vic 3. Not much but been working on repairing some cps2 stuff, still learning a lot. Pretty good with a soldering iron though. 4. Im usually looking for any cps2 stuff. also interested in getting an astro or blast city one day but currently no space...
Top