Search results for query: *

Sorry to hear that jordan, when did this happen?

https://www.aussiearcade.com/topic/98425-nanao-ms8-29fsg-no-hv-or-shutting-down/ Found this the other day and I may give these a shot. Not sure if you still have your CRT around but this could help. My ms8-29 had a strange startup the other day. It was blank for a minute and then finally I...

This is tempting.... Congrats homie!

l Thats what the fiberglass repair kit is for

There are some threads if you search around where people have fixed it with fiberglass repair kits and bondo. Just do it somewhere well ventilated. You will need to repaint when it’s fixed but if you sand the bondo well and stuff it’ll be like new

Good catch, I can’t believe I didn’t notice that! Glad it’s working @dillingerradio

If it is indeed the display you can replace it with another 1602 lcd. They’re pretty cheap on Amazon. If you go back a few pages I also have a 1602 OLED from AliExpress that works.

Also, to clarify further: The Astro city should have the ground wire with the connector (coming from the connector bracket) attached to the control panel, then the coin chute should have a wire coming from one of the screws (usually the left) which also attaches to the control panel. Then, two...

Pretty much any bolt that holds the control panel in will suffice just fine. You’re just trying to make a path from metal things back to earth so that if it somehow becomes energized you don’t end up being the better path to ground.

Haha amazing! MisterAddons rn:

I should add my complaint to the pile I guess. He sold me “5380 keys and locks” but no key came and the 5380 locks were actually just the rip-off lookalikes. It was only $20 so I didn’t really care. But ¯\_(ツ)_/¯

I enabled my bushido spirit detection chrome extension. It says “none found.” Sick collection btw

Sorry what cab is this in? If it’s an Astro those harnesses are pretty simple to reseat pins in.

Turn it all the way up. Also check the mister menu as there’s a software volume control

Do you have the volume pot on the mistercade set to 100%?

Bummer. Not too surprised, but glad you got the cab grounded anyway! Good thing to do regardless.

Yes, Astro monitors are floating

It could give us a better idea of peak voltages. I'd put a color bar up through CPS2 or something and see what the peak voltages are on the scope. With my Mistercade Versus I have to bump the brightness a bit on my MS8 monitor. That should take care of it for you.

Are you using a scope or a multimeter for these readings?