Search results

  1. ItsBobDudes

    Dreamcast - Naomi Capcom Panel Official Interest Check

    I'm in for 2. Thanks!
  2. ItsBobDudes

    WTB: Capcom Big Blue

    Damn boy, are you getting an Impress AND a big blue?!
  3. ItsBobDudes

    [WTB] Astro City or Blast City Candy Cabinet

    How did it go? Did Ken have what you are looking for ?
  4. ItsBobDudes

    SORTED Need help from someone in the US to forward me something from eBay

    I got it. PM with your info.
  5. ItsBobDudes

    First arcade PCB!

    Capcom cabs are hard to come by. I vote Mini Cute if you can find one and you have a big budget.
  6. ItsBobDudes

    [WTB] Astro City or Blast City Candy Cabinet

    There is a huge demand in the Northeast US but not a lot of cabs come here. If you are really committed to the buy, you will have to import one... sight unseen. GL out there.
  7. ItsBobDudes

    Building Arcade Cabinet, Technical Thread

    Wow congrats to everyone involved.
  8. ItsBobDudes

    [FOUND] Capcom IO feet

    @nem I printed up the last set 2 inverted 2 non-inverted. They fit great! Word of warning to anyone printing: don't torque down your wood screws or you could split the print.
  9. ItsBobDudes

    Sega Model 1 help

    I think we have scared GamingDoyle enough lol
  10. ItsBobDudes

    Sega Model 1 help

    Depends on how much they are asking. Those sound boards are all over the place. $40-$50
  11. ItsBobDudes

    Sega Model 1 help

    The sound board on the model 1 doesn’t sit inside the cage. You’ll have to ask to be totally sure. If you can get all the harnesses your life will be easier. Are you having this shipped? If so you’re in store for a huge box. pic of cage and sound bd on opposite sides of an NA cab below for...
  12. ItsBobDudes

    Sega Model 1 help

    You can use any amp. You do need the Sega sound boards though.
  13. ItsBobDudes

    Sega Model 1 help

    I did the RGBS and controls through the JAMMA board. I made a stereo harness to go from the filter board to the Sega AMP. I power the game board with a HAPP PSU. It’s a mess but it works.
  14. ItsBobDudes

    Sega Model 1 help

    Sometimes you gotta make your own harnesses haha
  15. ItsBobDudes

    [FOUND] Capcom IO feet

    V4 pics These look and feel good! @nem If you could do a design with the support on the other side. We can print up 2 of each type and keep symmetry. If you look at pic#2 on the left we see the front side of the mount and on the right we see the back side. After that I think it is a done deal...
  16. ItsBobDudes

    [FOUND] Capcom IO feet

    V2 all mounted up. Got some lean to it due to weight of the cables. V3 fitted into Capcom. This is the perfect fit.
  17. ItsBobDudes

    [FOUND] Capcom IO feet

    I didn't have a chance to put the V2 around a Naomi (they finished printing after midnight where I am). The V1 fit around the Naomi PERFECTLY. Maybe my pictures were bad. The third picture for V1 you do see some bowing but that is because the board was set up vertically and the weight of the...
  18. ItsBobDudes

    [FOUND] Capcom IO feet

    V2 Might have gone a little too thin.And width is just shy of snug.
  19. ItsBobDudes

    [FOUND] Capcom IO feet

    I printed up the mounts. They just barely squeeze into the capcom IO slots. They fit around the Naomi board and Netdimm. When the setup is vertical the top two definitely bear most of the weight. Overall pretty good!
Top