Search results

  1. duffcon

    CPS1 Multi. Official Thread

    Insert CPS1 multi here
  2. duffcon

    Let’s talk about the flood of Chinese CPS-1 conversions on ebay

    Yeah, just message the seller. In my case they replaced the a board
  3. duffcon

    Let’s talk about the flood of Chinese CPS-1 conversions on ebay

    What does the audio section look like? Is it orignal or the hack job like i pictured above. If it's a hack, then you options are limited because of non-original parts. I would just message the seller and ask for a solution.
  4. duffcon

    Pre-Order For Mini Cute Production

    General curiosity; is that something that you have to just eat as the cost of business? Or is it something like "if we find something" you have to pay it? That sucks if they just randomly decide to slap you with random inspection fees.
  5. duffcon

    CPS1 Multi. Official Thread

    General CPS1 question: Excluding SFII, are there any CPS1 titles that use more than 2 buttons?
  6. duffcon

    AXUNWORKS FORGOTTEN WORLDS SPINNERS, A NO SHILL REVIEW

    Thank @djsheep for the great thread. I like this idea. With the original spinner, you're pretty much making the control panel dedicated for FW due to size and also mounting points. This solution makes it possible to share space or swap a button for the spinner. I could see a setup where you...
  7. duffcon

    Sega System 16B multi kit installation & support

    I pulled rom 02 and checked it. No issues. Put it back. Everything is happy now 🤷‍♂️
  8. duffcon

    Magic Sword Completely missing text

    Success, The hitachi chips worked! Basically I needed a non-jedec chip. Popped in a b-21 c-board and all is good. Finding a original b-13 board is pretty unlikely so this is a good work around! Thank you for all the help!
  9. duffcon

    Sega System 16B multi kit installation & support

    My multi is having a new issue. no recent changes. Any game that uses dip5 in off (alien syndrome, Shinobi, etc) freezes within 30 seconds, often not booting at all. Multiple power cycles or resets will get a boot, but it will freeze in short order. Any games in the same bank with dip5 in...
  10. duffcon

    Let’s talk about the flood of Chinese CPS-1 conversions on ebay

    So I got the replacement A Board. It looks like a 'dash' to me. The audio section is original and works well. One complaint is the C dip block doesn't work so freeplay and demo sounds didn't work initially. I worked around it by just soldering the pins closed as a work around. I'll replace...
  11. duffcon

    CPS2 Red Screen of death!?

    I've seen solid blue screen as a suicide. Most likely your cause. Also failed batteries might leak and damage chips. Crack em' open!
  12. duffcon

    In this thread we tube and yoke swap monitors

    Most recycle places will not take a uncased tube. Also it's funny AF that you have a Katana leaned up against a Samsho display.
  13. duffcon

    Low/no audio from Q-sound RCA through Vewlix amp?

    This is true, the volume buttons on the A board / kick harness volume buttons do effect RCA/Qsound output
  14. duffcon

    Magic Sword Completely missing text

    Note I added a pic of the issue. Waiting on EPROMs @ShootTheCore Did you get a chance to try the patched rom on your setup? Am I right about my eprom issue?
  15. duffcon

    Magic Sword Completely missing text

    Here's something I just noticed. So at 18,19,31,&36 I have 27c301 (hitachi). At 30 I have M5M27c100k (mitsubishi) an at 35 I have D27C1000D (NEC) Pinouts respectively here: My 2 chips I have tried are as follows: MX27C1000DC (Macronix) & NM27C010Q (National Semi). I based this choice on the...
  16. duffcon

    Magic Sword Completely missing text

    Got some 27c010 chips in, same results. I also tried putting back the factory C board; according to the patcher, it shouldn't care what B chip is on the C board. With the original C board and the patched ROMs I get a blank red screen. As a sanity check, I put back everything and tested it...
  17. duffcon

    Magic Sword Completely missing text

    The rom type is questionable. The original chips are HN27C301G-20 the replacement i'm using is MX27C1000DC-15 which according to: https://wiki.arcadeotaku.com/w/EPROM May not be right; similar B boards (final fight) use 1mb 27c010 chips which apparently are a different pin out. I'll get some...
  18. duffcon

    Looking at project MVS Big Red - things to look out for?

    Cabs are a big money sink. Actually any hobby is. Do we really needs cabs? Of course not; there are so many ways to play the games now. Once upon a time you could make the argument that emulation was inaccurate and illegal, but emulation has gotten really good and there are many ways to...
  19. duffcon

    Magic Sword Completely missing text

    I downloaded the patcher and tried patching my dumped roms with the same results
  20. duffcon

    Looking at project MVS Big Red - things to look out for?

    Ha! collectors are usually in it for the long haul. Totally true about cost. My MVS 4 slot was complete, but even with just a wood repair/repaint and replacing the EL panels the total cost is more than I could sell it for. Doesn't matter, I enjoy it.
Top