Search results for query: *

Sounds good, so wiring the video ground from Jamma to the common ground will work safely?

We are here with a new issue... I got a new astro city which has been amazing, wanted to get Hot Gimmick going however it seems the game does not sync properly (which I assume is because of the absence of "video ground" on the mahjong pinout that was supplied with the hot gimmick manual. Does...

Bingo, that was it! Thanks for pointing it out I really needa pay attention more!

Oh my god you're right... Thank you for catching that I dont know how I kept going over it! I'll fix her up friday when I'm in and report the details

So I made the harnesses non chamma, and I'm still getting the same issues, another thread mentions how the monitors are grounded, should they both be sharing the same ground/sync wire?

sounds good, and sorry if I miscommunicated, what I mean by the 5V/12V is that both connectors on the link cable have this wired to the game board, meaning both the master and slave units are powering the board, is this normal as I see other link harnesses only have power to the board thru the...

Thanks for the suggestions, I'm looking to see if I can fix these ones I got here, any advice is appreciated I'll prob take the glue off one to check connections

one of the things that confused me is the fact that both sides are wired in for +5v and +12v, is it fine for that to be connected and wired to the pcb on the slave unit or should the slave not be interfacing with power at all?

https://ebay.us/m/JCV24I

I recently purchased these link cables to connect 2 NAS cabinets together for head to head gameplay however it seems on the slave unit the monitor output is completely messed up. Sometimes its dim and it always has some sort of sync issues MASTER VS. SLAVE Here is what the harness looks...

We dont have them for sale at the moment, this was the last one. Mana Pinball is our shop!

Perfect, that fixed that really bad curve on the edge, anyway I can fix the curves in the middle of the monitor (top and bottom)

Perfect I'll take a look next I'm in thanks!

Our shop sold a NAC with an MS9 in it and the customer wanted it rotated to put a 60 in 1 for the time being. After I rotated it though, the monitor developed a large bend on the top right, is this interference with the speaker at the top? Or is there a way I can adjust this on the chassis? Thanks!

I think it only looks this way because the writing is sideways, if you compare the two on the supplies I'm swapping the only difference seems to be the DMG pins at the last 3.

Hello! I'm looking to replace the 400-5198-01 power supply in my NAC with the 400-5261 power supply as it has +5V 12A as opposed to 7A. From comparing the two pinouts it seems that the two are identical except for the bottom right on CN1, on the 400-5198-01 the last 3 pins are listed as DMG NC...

Bump

Figured it out, the reset position is as pictured here, the image you sent is the default that it should be in. All is working now!

Seems like the jumper is already in this position which is odd

The CF is indeed original, I have booted into the VF5 software which is the server as you said. I've heard that it is possible to play using that keychip for the offline ver (final showdown ver.b) which is the DVD I am going to attempt to use. I did use the lindbergh multi for a little bit...