Search results

  1. Psyko-M1

    ANNOUNCEMENT - MMS1 - A 16 in 1 MULTI FOR JALECO MEGASYSTEM1(A) FROM CAIUS + HAMMY

    I should take on the 12mhz challenge with my board....
  2. Psyko-M1

    Official Interest list for Namco NA System Multi by Hammy (PCB design by Caius Arcade Repairs & Engineering)

    Thanks Hammy, it was cool to really check out this Multi. There's some pretty fine games on this unit. I'll check the seating on the PRG roms. Thanks for the tip. Nice note on the 2 Player settings. I'll keep that in mind when I'm messing with the board this week and see how that works...
  3. Psyko-M1

    Official Interest list for Namco NA System Multi by Hammy (PCB design by Caius Arcade Repairs & Engineering)

    If anybody is interested in seeing this multi in action, I'll be streaming it tonight (09-07-21) 8PM central. I'll be going through all the games, and showing off the hardware involved. This was sent to me to burn the chips and test by a community member, I'm still waiting for my own. Info in...
  4. Psyko-M1

    NAC Splitfire: JAMMA streaming solution

    As soon as these are available, you have my money. This is good news. Keep up the great work!
  5. Psyko-M1

    FOUND: Wayne Gretzky 3D hockey pcb

    PMd for interest.
  6. Psyko-M1

    ANNOUNCEMENT - MMS1 - A 16 in 1 MULTI FOR JALECO MEGASYSTEM1(A) FROM CAIUS + HAMMY

    You already know I want one @Hammy !!! Looking forward to this.
  7. Psyko-M1

    Official Interest list for Namco NA System Multi by Hammy (PCB design by Caius Arcade Repairs & Engineering)

    I'm thirsting for Knuckleheads and Fighter Attacker. Looking good man.
  8. Psyko-M1

    Flipping Ms. Pac-Man (Namco 20th Anniv)

    We shall see depending on what her goals are. As soon as my eeproms get in, I'll get this cook'n. Thanks again.
  9. Psyko-M1

    Flipping Ms. Pac-Man (Namco 20th Anniv)

    After watching my sister get incredibly frustrated with the 60-in-1 MsPac, I decided to buy one of these for eventually going in a small bartop build for her. I'll be enjoying this little board for the time being and will screw around with this. Thanks for this little project. I didn't know...
  10. Psyko-M1

    Outrun pcb video connector/plug

    https://www.digikey.com/en/products/detail/molex/0026644060/2002014?s=N4IgjCBcoLQBxVAYygMwIYBsDOBTANCAPZQDaIAnAAxUgC6Avg4QExkg0sBsXALL1S61GQA Wha-bam. Molex KK Series 3.96mm
  11. Psyko-M1

    Can anyone tell me if they've had positive experiences with Yaton?

    You'll get tested deals, but it'll be grungy. Hes incredibly responsive, and fair. It takes about 2 months to receive anything from him. I once bought a G-Net from him for $120 complete and it came with a pube. It's still hanging on my bench today for whatever reason.
  12. Psyko-M1

    Escarioth's Aluminum Cases

    I agree. It would have been nice to get some GX cases, or maybe for a Killer Instinct 1/2. Welcome back dude.
  13. Psyko-M1

    Fs:some stuffs exa arcadia (Panels dia blue ,pony ...)

    That Namco JVS to Jamma... Does that allow dual monitor output? That thing is rad!
  14. Psyko-M1

    NAC Splitfire: JAMMA streaming solution

    I'm still wanting a second one. I'm unsure what page I asked, but I need to get on this list. Thank you and keep up the great work.
  15. Psyko-M1

    Betsu Betsu: Open source Arcade Audio/Video splitter for capture/streaming

    So I learned a fun hack that kinda works. If you are not getting a stable signal from the OSSC from an F3/Betsu setup, switch to the active (AV2 or AV3) known-good input, and back to the F3. You MUST have something connected and running on the OSSC to lock onto in AV2 or AV3. Eventually the...
  16. Psyko-M1

    Betsu Betsu: Open source Arcade Audio/Video splitter for capture/streaming

    I do wish the Betsu formula had the same magic in them to balance the sync from the Taito F3 / other odd arcade boards with an OSSC or Capture card. I've tried everything to get them to sync properly, including a litttle sync cleaner that converts the 8pin DIN to 15pin.
  17. Psyko-M1

    Universal monitor bracket for Vewlix

    I also would like to know this.
  18. Psyko-M1

    Official Interest list for Namco NA System Multi by Hammy (PCB design by Caius Arcade Repairs & Engineering)

    YAY! I'm sure the wait will be worth it. Looking forward to this.
  19. Psyko-M1

    Lei Shen Zhuan / Battle Garegga hack - Help / Advice needed

    Add me to the Bootleg Garegga V1 club. The game out of the box had an error, would lock up, and would be unstable. Doing some inspection of the shit work the previous owner did, I reflowed the TXT and BASE sockets to get rid of "AUDIO ERROR" on bootup. That stabilized the board, and now it runs...
Top