Search results

  1. nismopunch

    Taito Type X 3 (TTX3) Owners Thread - Pics/Info/Stuff

    Wow that is some weird phone fat fingering for sure. Sorry guys! Edit: just remembered I can delete..so removed from this thread
  2. nismopunch

    Anyone tryed some Chemical Stripper for remove solder?

    Whoa that's cool! For science!
  3. nismopunch

    Type X3 - CMOS battery replacement procedure?

    Ah I see interesting, mine was far enough away other than where it connects so maybe not the same issue you experienced. Maybe some interference but can't say i've run into that before.
  4. nismopunch

    Type X3 - CMOS battery replacement procedure?

    Hi Layer, which wire do you mean?
  5. nismopunch

    [FOUND] Taito type x2 with Multigame x1 x2 nesica 68 Games + MAME 5000 games SSD 250 GB

    Finally wrote my drive and tested a bit. Thank you @drfunk2k for sharing! None of the emulated stuff worked for me with dip switch 2 ON like I normally have, gave the out of range on monitor. 2 OFF worked with the multi menu not sized properly but I could see the emulated games full screen...
  6. nismopunch

    Type X3 - CMOS battery replacement procedure?

    @Murray thank you for the explanation! The new battery didn't fix it and the board is receiving power after checking pins so it's some hardware issue in retaining bios settings that is beyond me. Oddly enough when I take out and replace battery then redo the bios and successfully boot it...
  7. nismopunch

    Type X3 - CMOS battery replacement procedure?

    Hey guys, the random reboot was solved by hooking up my JVS IO from the cabinet. It no longer reboots, however everytime I shutdown the computer it will not boot again without removing the cmos battery. I'm booting a yoko image, original game drive was removed but have the dongle so cannot try...
  8. nismopunch

    [FOUND] Taito type x2 with Multigame x1 x2 nesica 68 Games + MAME 5000 games SSD 250 GB

    If using windows use disk management to expand that partition
  9. nismopunch

    [FOUND] Taito type x2 with Multigame x1 x2 nesica 68 Games + MAME 5000 games SSD 250 GB

    Tried to write base image on a kingston ssd that had previously worked on x2 till it didn't. Still doesn't lol, so waiting for deliveryman to bring me a new PNY so I can try this out and report back.
  10. nismopunch

    Type X3 - CMOS battery replacement procedure?

    After seeing this X3 shut it self off so many times, seemed like too much of a coincidence it was always the same amount of time. I hooked it up to the JVS in my cabinet and it stays powered on. WTF, seems like the DMAC card is looking for JVS connection or it restarts? It's sort of alive...
  11. nismopunch

    Type X3 - CMOS battery replacement procedure?

    I actually did clean the sockets too but my explanation probably sucked haha. Appreciate your help! This mobo is probably busted, since I was able to test the majority of components as well in another old pc and could not reproduce issue.
  12. nismopunch

    Type X3 - CMOS battery replacement procedure?

    Cleaned the ram and tried one by one, didn't boot. Tried some spare good ram I had and didn't boot. Put all the original ram back in and removed/put back battery, and it booted! However after entering the bios and watching temps in the hw monitor, it randomly shuts off. It reboots itself and...
  13. nismopunch

    Type X3 - CMOS battery replacement procedure?

    Thanks nem! I tried reseating and trying ram one by one, BUT i did not clean the edge connectors. Will add that to my list. So far the only thing that makes it somewhat boot was removing the battery and putting it back. It will power up but do nothing, so the chase continues!
  14. nismopunch

    Type X3 - CMOS battery replacement procedure?

    Is there a procedure for this like the RE? Tried hunting around but don't see it mentioned anywhere, so possibly not. X3 wont post, so looking for info if there is a procedure to add to my list of stuff to check while I figure this out. Thanks guys!
  15. nismopunch

    Switching forum software to XenForo

    Whoa very cool, awesome work!
  16. nismopunch

    Taito Type X2 Upgrades and Mods

    thanks!
  17. nismopunch

    Taito Type X2 Upgrades and Mods

    I fiddled with it for quite some time and it just would not either connect or power the drive anymore. It was easily fixed by just connecting ssd directly, but still was a cool feature to have for easily updating things without a screwdriver. I'll look around and see if I find another kind that...
  18. nismopunch

    Taito Type X2 Upgrades and Mods

    just curious..those of you who got the PCI slot ssd/hdd rack mount had this fail in a year? https://www.amazon.com/dp/B0080V73RE I was greeted to cannot locate OS when trying to play the other day. Probably only ejected the drive a handful of times ugh
  19. nismopunch

    Taito Type X 3 (TTX3) Owners Thread - Pics/Info/Stuff

    You are on a roll! Thx for sharing!
  20. nismopunch

    Multi JVS v1.0

    Success! Not sure what it was but a new SD card did the trick. My older 4GB one read fine on computer, formatted, etc but never would work. No idea, but happily playing WMMT3DX with a manual on my ID cab. Love you guys! :thumbsup:
Top