Search results

  1. G

    Finally, multi System 16B (Sega)

    What's the 1.5? Which is the difference with the 1.0??
  2. G

    S16 OLED selector - A challenger appears

    I'm in terested in one or two
  3. G

    FS: Egret3 CP Spinner NOS Jammafier Nba PbP Sega Konami Taito SNK pcb and spares

    You are the second person that point that to me. For sure i remember uncorrectly, since i remember that this comes out from an ms9 tube of a Sega Rally2 cab. I will correct the issue.
  4. G

    FS: Egret3 CP Spinner NOS Jammafier Nba PbP Sega Konami Taito SNK pcb and spares

    I add a Nanao MS9-29 Monitor PCB and Sega sensor boards Some prices down Removed what sold
  5. G

    FS: Egret3 CP Spinner NOS Jammafier Nba PbP Sega Konami Taito SNK pcb and spares

    For sale some boards and parts from my collection - Egret 3 Custom Control Panel with Spiner and Trackball Custom made panel for the Egret 3 made for me long time ago This is a "complete" one player panel to use nearly any game. I use the following parts for this panel (all were nos and i use...
  6. G

    sold

    all sold long ago
  7. G

    FS: Egret3 CP Spinner NOS Jammafier Nba PbP Sega Konami Taito SNK pcb and spares

    Thanks for this information. Never know this.
  8. G

    FS: Egret3 CP Spinner NOS Jammafier Nba PbP Sega Konami Taito SNK pcb and spares

    I add a pair of NOS Jap Spinners and Nagano board
  9. G

    FS: Egret3 CP Spinner NOS Jammafier Nba PbP Sega Konami Taito SNK pcb and spares

    For sale some boards and parts from my collection - Egret 3 Custom Control Panel with Spiner and Trackball Custom made panel for the Egret 3 made for me long time ago This is a "complete" one player panel to use nearly any game. I use the following parts for this panel (all were nos and i use...
  10. G

    S18 : Moonwalker no mcu and any romboard patch!

    Hi. The file is no longer available. Couls be possible to have it please? Thanks. :)
  11. G

    STV Cartridge instructions and trouble shooting

    no its not the motherboard since it does the same with my second stv mobo and both works perfectly with original carts
  12. G

    STV Cartridge instructions and trouble shooting

    I disconnect everything, reflash two times the cart, use two other brand of 4gb microsd, but nothing. It does the same. I don't know if it's normal or not, but it seems that when he flash the board in the stv, at the end of the update process it blinked 3 times instead of the 2 you stated in the...
  13. G

    STV Cartridge instructions and trouble shooting

    flash.img has been deleted automatically after the first time update. Here is my sd file structure Here is inside the game_01 folder
  14. G

    STV Cartridge instructions and trouble shooting

    nothing. i always have both leds on but nothing is loaded also if i try to reset by myself after two minutes.
  15. G

    STV Cartridge instructions and trouble shooting

    I copied and formatted the sd two times using the last roll up pack. I set the jumpers in the same way i see in the mitsu video (two jumpers, one all left, one all right). But this type of behaviour occurs also when i used the lcd selector.
  16. G

    STV Cartridge instructions and trouble shooting

    Thanks for the reply. I test this cart in two differents stv and on both it's doing the same. Then if all is normal, why it cannot stop loading? I try to wait until 2 minutes to see if the led shutted off, but always remain with both leds powered and in ossc always no signal with the reset wire...
  17. G

    STV Cartridge instructions and trouble shooting

    Hi. I was using the lcd selector, now i also tried with only the reset wire and the jumpers, only. But when i put the reset wire from the stv into the multicart, i only get no signal from my OSSC (this only happens with reset wire connected). I only have both leds on but nothing more...
  18. G

    STV Cartridge instructions and trouble shooting

    Thanks. I see that the orange pin was connected on pin 4 of the STV instead of 3. Now i manage to have it connected. I also program it (i think rightly) (i use the bin inside this one http://www.mediafire.com/download/e56qgvt7j77o7f5/STV_Ultimo_Firmware_con_Autoreset_yAutoboot.rar) Now i'm...
  19. G

    STV Cartridge instructions and trouble shooting

    It won't work that way too. That's the first thing i tried, to follow the STV procedure, then i read into this post and this other NEW FIRMWARE!!!!! WITH AUTO-BOOT IMPROVED MICROSD SUPPORT AND AUTORESET. PLEASE TRY | Arcade-Projects Forums (arcade-projects.com) to discover that you need to use...
Top