Search results

  1. Derick2k

    Ribbon cable y adapter

    You mean like an ide / SCSI cable with 3 or more connectors? Or like actually split into 2 ribbon cables? What connector type/pin count are you working with?
  2. Derick2k

    Irken (MiSTer) JAMMA Expander

    This has been the complaint regarding arcade cores, and the fact that mister devs refuse t o address the input issue for jamma/jvs cause arcade cores are just not important enough. And if you don't know what/how MiSTer is just got get rPi. Well that's the mentality. @invzim tried to explain why...
  3. Derick2k

    SOLD: Mortal Kombat 4 PCB

    Thats a nice board, and since its Brizzo you know that it works without issues.
  4. Derick2k

    Cleaning CPS 1 board corrosion

    You can make a paste of baking soda/distilled water, apply it/work into the corrosion and let it sit 20-30 minutes and then scrub/rinse it away with more distilled water. Dyr it off and then apply some deoxit if needed You can also scrub it with toilet cleaner, like $2 at home depot, make sure...
  5. Derick2k

    Irken (MiSTer) JAMMA Expander

    Run update all, I notice it sometimes hangs and starts up again. There were talks about corruption or something somewhere. I don't follow Mister so....not sure what it was exactly.
  6. Derick2k

    Irken (MiSTer) JAMMA Expander

    Just started myself, so....
  7. Derick2k

    Irken (MiSTer) JAMMA Expander

    Nice! Its like saying "pay attention human, you have something messed up in your set" I like it :thumbup:
  8. Derick2k

    Irken (MiSTer) JAMMA Expander

    Good to know :D @avramce Chime in with how you set up things. I suggest everyone do a fresh install and set up things according to the way Invzim specifies.
  9. Derick2k

    Irken (MiSTer) JAMMA Expander

    One thing I havent tried yet are 2P, 3P & 4P support/use. @avramce posted this on Twitter, though I should post it here I know Mister has issues with the way inputs works, etc...not being mame/arcade fiendly. Anyone else tried 2P/3P/4P arcade cores, etc....
  10. Derick2k

    Vertical position Adjustment not working

    ^That^
  11. Derick2k

    OSSC Pro, with ROTATION!

    So looks like there will be 3 flavors of OSSC products, plus some expansion boards and a new proper remote. OSSC Pro Expected price? Under $500 =O due to components shortages, but will be reduced once things normalize. I was expecting 4K upscaling at $500 :D OSSC Pro Expansion card...
  12. Derick2k

    Irken (MiSTer) JAMMA Expander

    If you post over at the Mister discord or forum get ready to get banned lol, jk... but they are more console/pc centric over arcade stuff. I think if the project survives, we will eventually get better support for arcade boards, etc...it will just take time is all. If you can, please try and...
  13. Derick2k

    Irken (MiSTer) JAMMA Expander

    @invzim That is a pretty cool way to protect things. I find that my 12v supplies are either at 12v or a little below. Since the 12v is for the audio amp of the JE, you would know what it can safely handle, so maybe adjust thresholds to that to be safe?
  14. Derick2k

    Irken (MiSTer) JAMMA Expander

    you should be able to use a good quality usb extension cable from the hub to the JE, instead of the OTG cable. Ex....
  15. Derick2k

    Irken (MiSTer) JAMMA Expander

    Had a usb hub I wasnt using so slapped it on there just to try it, I don't think it would be an issue. You could do this, but I don't like it, or really want it, think its needed. I have zero issues with removing the sd card / board from the cab if I really have to some desktop...
  16. Derick2k

    Large arcade collection for sale

    Board has the correct layout. It just looks like masrkroms/otp eproms were replaced with uv erasable eproms, which could be factory or some type of repair, nothing wrong with that. If you want to verify further, the pcb should be labeled TP-013B like this: Some of the chips should be...
  17. Derick2k

    Irken (MiSTer) JAMMA Expander

    I dont see the need, but I guess if you really need it you could use a USB hub if you need to have multiple things plugged in.
  18. Derick2k

    Irken (MiSTer) JAMMA Expander

    Thats sucks, they probably want to charge you some import tax or something.
  19. Derick2k

    Irken (MiSTer) JAMMA Expander

    Cool, I was thinking the same thing to upload an image of the preloaded/set up SD card, but Im using 512gb card, not sure how the image will compress, etc..plus I still want to test a few things if I do it :)
Top