Search results

  1. Lions3

    Custom Taito F3 Red DarkSoft Multi PCB plates From Lions3

    Sorry, regional plastic supplier only had the thinner material. Still waiting on 6mm acrylic I use for base plates. Looks like just over a week (at the earliest).
  2. Lions3

    ATX-2-Naomi Power Adapters

    PM sent!
  3. Lions3

    SOLVED + Surprise: SF2 WW with bad front sprites. HELP

    After some digging it appears to be a bad A board. Also on a side note, while testing I discovered this was a previously undumped revision of SF2 WW. It's actually the final USA revision that matches the final JP release. Dumped and added to MAME the other week :thumbup:
  4. Lions3

    SOLVED + Surprise: SF2 WW with bad front sprites. HELP

    Hey guys, trying to dip my toes back into CPS stuff. It's been years. Picked up a SF2 WW today with minor graphic glitch. Boards are clean. "A" has a Z80 repair but audio is fine. Also it's a CPS Dash board. Which is odd for a WW board, right? Everything plays fine. All background sprites load...
  5. Lions3

    Taito F3 Multi Label $25 Donation To Create These

    A mix of colored and clear acrylic. I try to avoid painting. As it seems to take forever for it to truly set. Plus then I worry about it flaking off in the future.
  6. Lions3

    Taito F3 Multi Label $25 Donation To Create These

    As @kidpanda can attest, the pcb acrylic plates didn't fit completely right. They were going to cover the bottom and top of the bare multi pcb but a few screws and spacers I designed blocked the black brackets on the case from closing completely. So going to have to revisit my design. On the...
  7. Lions3

    Taito F3 Multi Label $25 Donation To Create These

    Here's a top plate i'm working on. I had to replace the F3 logo and some of the larger text in Adobe Illustrator. I've been posting my progress in Instagram.
  8. Lions3

    Taito F3 Multi Label $25 Donation To Create These

    Would you guys ( @PascalP) be okay if I used this label or a version of it for engraving some acrylic i'm working on for the multi? Well assuming the lettering translates well (readable) on acrylic. If not, that's fine. I'm not trying to steal others hard work.
  9. Lions3

    Home Arcade System

    hehe.. glad to see i'm not the only one that keeps checking back to see when these HAS unites are available. :D
  10. Lions3

    WTB Candy Cab (east coast)

    My suggestion is to make friends with whatever local gamer/arcade guys you have in your area. Go to the meet-ups, etc. Those are the guys that probably can help you find something in your area.
  11. Lions3

    Taito F3 Multigame

    Thanks to @kidpanda I have a Taito F3 in hand. We chatted about my ideas for an acyrlic case. I'm thinking my design will support both those that plan to use a red game shell and those that want an acrylic cover instead. I'll show more once I have a chance to draw up my design in Illustrator or...
  12. Lions3

    Taito F3 Multigame

    I think a right angle ribbon cable connector would be better. The height would be less than the LCD then. If you undermount the ribbon cable you would still be increasing the overall height needed for the LCD board.
  13. Lions3

    Two new 3D Printers that are game changers

    I would keep an eye on the tread mill printer. See if they get shut down. As there's a patent on that technology. Several small REPRAP offshoots have tried and been shut down cus of it. Or maybe they'll luck out and the patent finally expired. FormLabs had the same thing happen to them. Turns...
  14. Lions3

    Taito F3 Multigame

    looks like i'll have a Taito F3 setup to look at tomorrow (thanks @kidpanda !). I have some ideas, but it'll really depend on what makes sense once I have a system to hold and mess with. On a side note, where can I buy just the Multi LCD controller pcb?
  15. Lions3

    Taito F3 Multigame

    Most printers are around 20cm x 20cm unless you have an oversized bed. Plus then you run into other issues such as warping. Then there's the time to print. A big print like that could take a day or two. LOL
  16. Lions3

    Taito F3 Multigame

    So it looks like you could put the multi inside an existing Red game case. Is that what people are going to do? Similar to the CPS2? Are you guys just needing a sheet of acrylic for the bottom area to back mount the display and buttons? Or are people wanting clear acrylic over the Multi pcb and...
  17. Lions3

    Taito F3 Multigame

    Hmmm.. I could. Just need to catch up on the project. Plus maybe get my hands on the boards to measure.
  18. Lions3

    Price check on CPS2 games

    Yeah, that's cool but then if you replace the EPROMS you've now created a conversion board. Which isn't worth the same as an original. But if you want a cheaper price that's the way to go. Plus with the phoenix roms you can change the region on those green boards. Also here's my guestimate for...
  19. Lions3

    Home Arcade System

    Any update on another run of your Superguns? I could use one now that I'm getting back into CPS2 stuff again.
  20. Lions3

    Small & Simple 3D print job needed.

    okay, that's not too bad. If you're interested I could 3d print that in whatever color you like in ABS (Lego) plastic. Else if this is going to be a visible part I could laser cut it out of 1/8" sheet of acrylic. How thick does it need to be?
Top