Search results

  1. digitron

    IGS PGM + RetroTINK 5X Screen curl?

    Thanks for sharing this. Looks like there are quite a few nice updates in firmware v1.98, I had that green screen issue once in a while also, looks like Mike's already fixed it. :)
  2. digitron

    PGM convert game card:dodonpachi dai ou jou , ketsui , or espgaluda

    I've been using Sheep's conversions for over two years with no issues, excellent customer service, can't go wrong.
  3. digitron

    Irken (MiSTer) JAMMA Expander

    Anyone else heaving input issues occasionally in DDP? Holding shot and left sometimes doesn't register left.
  4. digitron

    PGM single game PCB assembly and troubleshooting

    Curious, which GAL16V8B model #'s are you programming with your TL866? @Mrhide @bodgit
  5. digitron

    PGM single game PCB assembly and troubleshooting

    Do most eprom programmers support these GAL's? Apparently mine does not ;(
  6. digitron

    Irken (MiSTer) JAMMA Expander

    ini file config would be fantastic :) use-case = powered usb-hub has to be turned on manually after powering on the cab, would be nice to have the cab and usb-hub on the same power switch. Not a big deal. Currently I'm powering on the cab, waiting a few seconds then powering on the usb-hub...
  7. digitron

    Irken (MiSTer) JAMMA Expander

    @invzim Looks like the jamma edge needs to be powered on before the usb powered hub. Is there a way to change the behavior (disable) via firmware update / menu option or something? I'm assuming this is part of the voltage guard thing?
  8. digitron

    Irken (MiSTer) JAMMA Expander

    Do you hit Save Settings in the Core menu after you make the changes in the service menu? Maybe run through all the updates on the Mister again. I had issues with Esp Ra.De, ran update all and it just magically started working again..
  9. digitron

    Irken (MiSTer) JAMMA Expander

    Ah right, yeah I mapped Service on another button on a gamepad like yours in DDP and that worked. :) You have to hold the button down for a few seconds.
  10. digitron

    Irken (MiSTer) JAMMA Expander

    If you hold down 1p start + right, if doesn't bring up the menu in ddp? It works on mine...hmm.
  11. digitron

    Irken (MiSTer) JAMMA Expander

    2P works for me too, be sure to change the expander to Gamepad mode (https://irkenlabs.com/jamma-expander/operation-gamepad) when you setup 1P binds and 2P should work just fine. Also got a chance to connect a usb exstension cable to a powered usb hub, keyboard, wifi module all working fine. I...
  12. digitron

    Irken (MiSTer) JAMMA Expander

    That feeling when you finally keymap 'coin' to the actual coin slot and it works on mister...ahhh
  13. digitron

    Sigma Raijin

    Haha, yea, it's super comfortable to play on and actually fits nicely on the side of my desk. I was worried it would take up too much room.. The video out on this thing is great. If you hate yourself as much as I do, go solder up some 8 pin din connectors, what a horrible connector it was used...
  14. digitron

    Sigma Raijin

    If anyone decides to make their own scart cable to use with Sigma Raijin, connecting to an OSSC or RT5X, I used 330ohm resistors on the RGB lines and a 470ohm resistor on sync. Works prefectly, thanks @twistedsymphony & @RGB for the help. :)
  15. digitron

    Irken (MiSTer) JAMMA Expander

    The selling point of the expander (to me) is so that I never have to open the cab to make setting changes to the mister, that and direct_video > rgb. We can still do that, just takes a few extra cables and a powered usb hub (cheap). The sync block feature is also very nice, the components used...
  16. digitron

    Irken (MiSTer) JAMMA Expander

    If you connect your keyboard directly into the mister, you won't get any display. Invzim confirmed the expander is powered by the usb port. We'd need to plug in a usb exstension cable to a usb hub then connect that hub back to the mister. If that indeed works, I would probably run the hub out...
  17. digitron

    Irken (MiSTer) JAMMA Expander

    Cave cores - ddp works fine, Dangun Feveron kicks on SyncGuard and Esp Ra.De just shows garbeled DDP screen? DCV = 5v mister.ini = https://irkenlabs.com/images/expander/xmister_composite_and_direct_video.png.pagespeed.ic.8PP0brz5v0.png
  18. digitron

    Irken (MiSTer) JAMMA Expander

    Should I get video if the usb is unplugged? Only get video if the usb is connected to the expander. I wanted to briefly connect usb hub with keyboard..
  19. digitron

    IGS PGM + RetroTINK 5X Screen curl?

    Flashed to v.1.84 and it's weird, with Esp conversion on one PGM mb I get that curl, tried a completey different pgm mb using DDP and it looks great (no curl).
Top