Search results

  1. S

    Sega Model 1 help

    Here's mine inside a Mini Cute with the Nanao monitor that can handle medium resolution - we also added a 4PDT switch on the frame to select between 15 and 24khz - I believe it's not safe to switch whilst it's powered on - so beware if you try the same mod. We still need to tidy up some of the...
  2. S

    Sega Model 1 help

    You'll need to hook up 5V & GND to the main board (lots of connections to spread the load of all that current) Note - for the 5V & GND to the main board - you'll want to take directly from the PSU and not from the JAMMA edge - it's too much current for that contact size apparently, it'll work...
  3. S

    Kavas' Sega Aero City Restoration

    TE Connectivity Universal Mate-N-Lok https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/1-350779-3/5157528
  4. S

    WTB AWSD, E3, E2 casters, glass instruction bracket holder, AWSD Coin Sticker, ETC

    I ordered them through Zenmarket - you have to be very careful when ordering because they might show a picture of something and then in the text say 'not this one' or 'different wheel type'. Plus prices can vary massively. Using the model numbers from the website I attached is the most reliable...
  5. S

    WTB AWSD, E3, E2 casters, glass instruction bracket holder, AWSD Coin Sticker, ETC

    Hammer casters are what I believe are used for most candy cabs. E2 & 3 use 2 x 320E-N (Nylon) 50mm (swivel) 2 x 320SR-N (Nylon) 50mm (fixed) You should double check the bolt pattern on their website before ordering
  6. S

    ATAPI/IDE ODE Testing

    @electric_monk Is that the new version that's on sale on your site? Thanks!
  7. S

    Pana Twin or Sigma Raijin?

    Tim Worthington's AV-Driver is what you should use - it is awesome http://etim.net.au/av-driver/arcade/
  8. S

    SEGA SYSTEM-16 MULTI - OLED BASED GAME SELECTOR

    Hello, could I please be added to the list for OLED selector and remote board! Thank You!
  9. S

    Consolized Bubble Bobble

    That's the HighScoreSaves board that also gives you access to all of the options including Super Bubble Bobble
  10. S

    Consolized Bubble Bobble

    Latest project completed working with @Arcade game
  11. S

    Kavas' Sega Aero City Restoration

    For crimping smaller stuff like JST - I use one of these https://smile.amazon.com/gp/product/B078WPT5M1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Be aware that different connectors require different gauge wire to correctly crimp For thicker wire, you might need to use the official tool...
  12. S

    Kavas' Sega Aero City Restoration

    I think PSU connectors are 455-1186-ND and 455-3992-ND Pins are 455-1133-1-ND or 455-1319-1-ND depending on the wire gauge I'm not 100% certain on the leg levelers - I'm going from the Aero Table but most parts are compatible with the Aero City and they also use that size leg levelers on the...
  13. S

    Rad Mobile conversion

    I don't think that Rad Mobile is encrypted - the boards that are encrypted have that big squarish battery backed chip on the ROM board. I'm not sure but I think the general rule of thumb is that if they have a dedicated cabinet with special controls, it's not so important to encrypt them...
  14. S

    Sega Model 2 / 3 hacked romsets?

    @Arcade game & I only wired up the digital buttons and the lamps to the 50 pin connector (CN1) on the I/O GND, 5V, Test & Service are consistent across all Model 1 the others move around mysteriously I think the analog inputs are just 0-5V and connect to other pins on the I/O, which should...
  15. S

    Sega Model 2 / 3 hacked romsets?

    See my previous post here for the pinout Virtua Racing filter board @glstar I've been inspired by your multi-fighter to do this! You can also buy larger and smaller connectors for different Sega board sets. Essentially, it's the same pinout as the breakout filter board - just more condensed.
  16. S

    Sega Model 2 / 3 hacked romsets?

    As Twistedsymphony says, the filter board is really just a straight through connection - I just normally wire directly to the 32 pin connector Most of the red wires are 5v (the ones on the left and right of the connector) The black wires are all GND The white and red in the middle wires are...
  17. S

    Sega Model 2 / 3 hacked romsets?

    AMS - You do realize that without an I/O Board you won't get any Analog or Digital controls, so you won't be able to control the game. It should just be 4 wires from the main board to the I/O along with 5V power and and to the I/O
  18. S

    Bought my first Model 2 board and I have no idea what I'm doing! Please help!

    The internet says that House of the Dead is a 2C CRX which means that the filter board pinout is below. The filter board is really just a breakout for those weird looking white connectors on the PC. They still sell those connectors and I've had success wiring straight to them and ditching the...
  19. S

    IC: Sega Swing & Taito Egret 29 Marquee repros

    I'm in for one Swing one please! Thanks Mark
Top