Search results

  1. meybarra

    MiSTerAddons MiSTercade add-on - MiSTer for JAMMA cabinets

    Hey folks, I think you can learn from one of my mistakes. I renamed the pre-configured 15 khz ini file to mister.ini (all lowercase). When I tested, I got a rolling image on my cabs. I wasted nearly two evenings troubleshooting this setup, Finally, last night, when I renamed it to MiSTer.ini...
  2. meybarra

    Building Arcade Cabinet, Technical Thread

    I haven't modified my RT 125A PSU yet, but I got impatient and tossed a MWP 606 into the repro cute. It solved my load issues with Mister Expander and MVS.
  3. meybarra

    Console JAMMAizer! Easily connect home consoles to your JAMMA arcade cabinet.

    Also, try plugging a keyboard into the mister while connected to the Jammaizer and re-configure the gamepad in Mister.
  4. meybarra

    Console JAMMAizer! Easily connect home consoles to your JAMMA arcade cabinet.

    Maybe the Brook UFB is set to an incompatible mode? I previously had my Mister/Jammaizer setup working with the McCthulu adapters with rj45 to usb cables (PS3 mode?).
  5. meybarra

    Irken (MiSTer) JAMMA Expander

    For consoles, are you switching your mister expander controls to console gamepad mode? https://irkenlabs.com/jamma-expander/operation-gamepad Are you switching back to keyboard mode for arcade cores?
  6. meybarra

    Building Arcade Cabinet, Technical Thread

    I think it's a limitation on this version of that Mean Well PSU. Specifically, they expect a minimum load before they'll operate. Some of my pcbs don't draw enough of a load, somI get the beeping and flasshing light. I'm planning to copy another forum member and add some resistors to trigger a...
  7. meybarra

    Hello from Virginia, USA

    Welcome!
  8. meybarra

    Pre-Order For Mini Cute Production

    I finally got my Kortek KTN-2001 running. It works, but the video signal is noisy. CPS2 and MV1FS worked fine. However, my Meanwell PSU just chirped when I tried my Pi2JAMMA and Mister Expander. I'll probably try the resistor hack mentioned earlier to help with the load.
  9. meybarra

    Irken (MiSTer) JAMMA Expander

    2 player worked for me last weekend CPS SFHF. The Mister Expander was on the default keyboard mode.
  10. meybarra

    [SOLD]: Ultimate Mortal Kombat 3 (UMK3) pcb

    Problem solved. Thanks for the tip.
  11. meybarra

    MiSTer questions

    I've heard people had success with a Jpac. You could also wire up some Brook or McCthulu boards for controls.
  12. meybarra

    [SOLD]: Ultimate Mortal Kombat 3 (UMK3) pcb

    Package received in working order. Many thanks. Hoping to get my JNX Raiden soon, and then hunt down some good sticks and a pcb case. I noticed some graphical glitches when Sub-zero is involved. Let me know if you have any suggestions.
  13. meybarra

    Irken (MiSTer) JAMMA Expander

    Works great! I just used my current mister setup, edited the config file, cleared my old key mappings, made a minor adjustment to the monitor, and I was in business. It took me a minute to figure out the menu navigation. Brilliant work @invzim
  14. meybarra

    Irken (MiSTer) JAMMA Expander

    Got it. Can't wait to play with it
  15. meybarra

    PCB Feet

    Amazon: https://www.amazon.com/dp/B088R7Y2X8/ref=cm_sw_em_r_mt_dp_4EZV68TE5850YRB4K1PM?_encoding=UTF8&psc=1
  16. meybarra

    CPS2 multi question

    I think another forum member with the same issue mentioned he would try to use a hot air station to do the job.
  17. meybarra

    CPS2 multi question

    I had this problem two years ago. I ordered the parts you listed and soldered them on without issue. It was even my first soldering job. However, I used it as an excuse to buy a Hakko desolder gun and soldering iron.
  18. meybarra

    FS Windy Gaming ATP-300 Supergun & Fierce Fightstick

    $300 $250 Includes the supergun, power cable, composite/s-video av cables, scart cable, cheap db15 controller cables, adapters for undamned compatibility, and corresponding fierce fightstick. The stick has a db15/neogeo connector for direct supergun control plus a Brook ufb with usb...
  19. meybarra

    Pre-Order For Mini Cute Production

    Flipping the bezel upside down helped with my Kortek's Samsung tube curve. The gap is much less noticeable when it's at the top of the screen.
Top