Search results

  1. defor

    Nearby Namco 2X6 for testing? (New Jersey)

    TBH, it's more an oddball thing to find a game that DOES support the ps2 ports... Somewhat like Naomi games that support the Maple bus for DC controllers. The only games that I'm aware even advertised the feature were Tekken 5 and 5DR as they have a custom harness to add back the controller...
  2. defor

    Nearby Namco 2X6 for testing? (New Jersey)

    nope- the gundam games definitely don't do it either. that's actually where i started down this deep dark hole of system 2x6- trying to get gundam vs series up and running at home... Pride actually does sound right as having it...
  3. defor

    Nearby Namco 2X6 for testing? (New Jersey)

    only a very FEW games support the PS2 ports sadly, and zoids definitely isn't one of them... Basically you're looking at SC2, SC3, Tekken 5, Tekken 5DR, and .. i think there's something else, but it's a pretty bad selection... tons of games that COULD simply don't, and shoehorning support in is...
  4. defor

    Nearby Namco 2X6 for testing? (New Jersey)

    Just for everyone's reference- the zoids games will work with pretty much any JVS IO that offers 2 players and digital IO's.. the only thing you lose by not using the official Taito JVS pcb is the serial interface for card readers, and I'm not even 100% certain that can't be achieved with...
  5. defor

    Nearby Namco 2X6 for testing? (New Jersey)

    (I'm horrible) havent stopped by here in a while (anxiety issues) - I owe a lot of people a lot of info...Varga reached out to me on twitter, and I'm going to cobble together a how-to for the IO half of this.
  6. defor

    System 246/256 I/O board Gun Compatibility.

    I can also confirm sega IO 1 and 1.5 work with both games fine, HOWEVER, there is some wierdness without a card reader connected to cobra.
  7. defor

    Minna de Kitaeru Zenno Training 1.50 IO board error?

    It definitely needs both of those items at bare minimum. I forget offhand (I'd have to check the schematics of the manual to see) if it needs a camera and motion sensor too... The game was sold to operators as a way to try and make some money back on their Idolmaster cabinets as it's a straight...
  8. defor

    Customized versions of games for system 2X6

    Most 2x6 games actually don't need their specific IO boards, simply a JVS IO that can satisfy the specific needs. In the case of RRV for example, the game will turn the steering wheel all the way one way and then the other to test the steering potentiomenter using the FFB motor. It also...
  9. defor

    90 degree angle/riser for the STV Cart??

    Can I get one of these too? Thanks!
  10. defor

    Customized versions of games for system 2X6

    COMING SOON: (Will update this post) All NAMCO HDD games on one disk. (No Taito Games)
  11. defor

    Customized versions of games for system 2X6

    COMING SOON: (Will update this post) Battle Gear 3 FFB Hacks
  12. defor

    Customized versions of games for system 2X6

    COMING SOON: (Will update this post) Ridge Racer V FFB Hacks
  13. defor

    Customized versions of games for system 2X6

    Discussion Thread: Time crisis 4 working on standar system 256? Description: Time Crisis 4 Japanese and Export versions only boot on a "Super" System 256 chassis which has better specifications (and a sound expansion card) than the more readily available System 256 chassis. This patch can be...
  14. defor

    Time crisis 4 working on standar system 256?

    I cannot take credit any of this, other than comparing numerous Time Crisis 4 dumps. The only difference is a two byte change to the TC4LOAD file. NM00032 TSF100X-NA-A, Ver.A49 Time Crisis 4 TC4LOAD: FIND: 7C 84 83 8F 10 00 60 14 REPLACE: 7C 84 83 8F 10 00 00 10
  15. defor

    Naomi 2 HDMI

    Also curious on this topic – I believe we spoke a couple years ago about this – do you need any hardware to help get the testing moving along, it sounded like out of the box the Naomi one should more or less work as is without a new firmware, but would need new cables is this correct?
  16. defor

    Consolized Naomi 1/2

    If you’re using the two DB15 connectors for standardized Neogeo pad input, how are you using the same connector for games that require analog like your screenshot of initial D? Or is this what the DB 25 on the other side is for?
  17. defor

    WTB: Sega Dreamcast Sticks (Can be broken/Incomplete)

    I'm in need of: (4) HKT-7300 Arcade Stick (can be agetec "rebrand") As long as the shell, metal base, and dreamcast pcb are intact and in decent cosmetic condition, I'll gladly take wierd parted out or broken sticks! (2) HKT-7500 Twin Stick I'd like at least one unit complete- the second...
  18. defor

    90 degree angle/riser for the STV Cart??

    I'm down for one as well!
  19. defor

    Which version of the Namco 2x6 do you own?

    ok no worries!
  20. defor

    Which version of the Namco 2x6 do you own?

    You have an interesting point and I’m not honestly sure- I’ve seen silver (bare metal) model A with the Jamma interface as well on yahoo auctions but they don’t seem as common- my guess is that Namco moved away from the built in io boards in the middle of this timeframe- dunno though There’s...
Top