Search results

  1. Aaronr33

    Ringedge no video

    Heres a fix i found. Ringedge 1 would fire up, no video, shutdown, startup again, continue to run with no video. Changed all removable parts one by one for known good working parts and turned out the cpu was bad. One more rinegdge saved.
  2. Aaronr33

    Ringedge no siginal

    What happens when you turn on the ringedge. Do fans spin?
  3. Aaronr33

    Ringedge 1 problems

    Have one ringedge that froze when in attract mode, looks like memory was damaged. Put new memory in and now get this nonsense, game boots but skips honeycomb splash screen quick and then goes straight to test mode? See boot video View: https://youtu.be/S6nFw6rJd-w
  4. Aaronr33

    Ringedge 1 multi guide?

    Easiest to get a re1 image and xcopy c: drive contents to your re2 drive, overwriting re2 c: drive. I never was able to get patch to work.
  5. Aaronr33

    WTB: Naomi Marvel Vs Capcom 2 Cart

    https://jjstuff.com/product/sega-naomi-marvel-vs-capcom-2-new-age-of-heroes-rev-a-cartridge-841-0007c-03-bbge-01a4413/
  6. Aaronr33

    Ringedge2 powers off after a couple hours

    I would maybe try replacing the power supply first. Can even use a atx or consumer supply, just match the wattage at least. They are server grade so are reliable but nothing lasts forever. The mobo turns the power supply on just like any other consumer PC.
  7. Aaronr33

    initial D card reader

    PM Agaynte, and order card reader. Card reader needs to be powered, +5vdc or +12vdc, can't remember but one them. Enable card reader in test menu. Connect serial cable to com2 Boot game, start a gane and when promoted to insert card press enter on card reader board. That's it. The device...
  8. Aaronr33

    initial D card reader

    Com1 is ffb, com2 is card reader on ringedge. No difference than regular computer. You will need a usb to serial.adapter and set usb port as com2
  9. Aaronr33

    initial D card reader

    Not same The gamoover is stand alone arduino based (winter's is rpi) Connects to ringedge using serial cable, basically replaces the card reader and has a lcd display so you can scroll to different cards/saves I dont think winter's does rfid which would be newer initial d (4/5/6/7/8 ). I...
  10. Aaronr33

    Ringedge2 powers off after a couple hours

    My RE1 runs at 35 celcius. Shutdown is usually 50 celcuis or more. Wont be able to access bios easily.
  11. Aaronr33

    initial D card reader

    Mine works fine, id 6/7/8 Gamoover site is where you can find https://www.gamoover.net/Forums/index.php?topic=40809.0
  12. Aaronr33

    LF Daytona USA DX wiring diagram.

    Do you have autocad, I think it can scale images pretty good.
  13. Aaronr33

    initial D card reader

    Card reader emulator are already out there What do you anticipate to do different?
  14. Aaronr33

    Ringedge2 powers off after a couple hours

    Check cpu temp in test mode after it runs for <2 hr Also there are error codes stored that can be accessed in test mode.
  15. Aaronr33

    29e31s went downhill

    I will check, but that's a good catch, may of been pushed down on board when doing cap kit. Would that cap/diode soldered on bottom be a factory "tweak" ?
  16. Aaronr33

    29e31s went downhill

    Pictures
  17. Aaronr33

    29e31s went downhill

    Its more far gone now Get no DC voltage on secondary of T803 Measure at each diode. Will get some pictures
  18. Aaronr33

    29e31s went downhill

    Yes and yes. I usually do two at a time, desolder, install and solder.
  19. Aaronr33

    29e31s went downhill

    I have a 29e31s that i installed a cap kit in. When i powered back up i blew r456. Replaced r456 and the HOT, powered up and blew both again. Had a bright dot in middle of screen. Now, there is no DC voltage on secondary of T803 (measured at diodes) When chassis is powered, you can hear a...
  20. Aaronr33

    Sega Fan Replacements

    Noctura will have 3 wires two for voltage and one for rpm. RPM is not needed for power supply so you will use only two wires. Just need to splice the old connector to new fan wiring. If you have it wrong fan will spin backwards.
Top