Search results

  1. Arikado89

    Greetings from Dubai!

    Welcome, @seifus :)
  2. Arikado89

    Nanao MS8 "broke" in transit

    It happened to mine as well before. Here is what I did to fix it: - Check the V and H hold from remote board under the CP. - Make sure the Blue-Red and Brown-Yellow wires that coming from the yoke are tightly placed on the chassis jumpers. - Lastly, which I doubt this is the case with your...
  3. Arikado89

    Irken (MiSTer) JAMMA Expander

    Received mine today :)
  4. Arikado89

    Street Fighter EX Plus freezes on startup.

    Unfortunately, I don't have a spare ZN1 motherboard, I have 3 ZN2 complete setup though which I cant use for the testing. I find it odd that it played well on other cab for few mins then it stuck on Arika start up logo.
  5. Arikado89

    Street Fighter EX Plus freezes on startup.

    Thanks @Hammy! I'll check the capacitors on motherboard and see if there's a faulty here and there.
  6. Arikado89

    Street Fighter EX Plus freezes on startup.

    Hello guys, I have the game running on free play for weeks with no issues. However, it started to freeze during gameplay and attract mode. On the next boot up the game freezes on start up as can be seen from the picture. I ran a ram/rom test and all were ok. Cant seem to find much online...
  7. Arikado89

    KOF XI black screen issue!

    I recently purchased a KOF XI cart(JP) "Original" from eBay. Today I tried it out with my KOF NeoWave(EN) setup which is 100% working. What I get is a black screen after "ALL BACKUP DATA WAS CLEARED" notice screen. I am fairly new to the Atomiswave hardware, So Could anyone clarify to me...
  8. Arikado89

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    Just did, Thanks!
  9. Arikado89

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    I experienced same issue. Did you figured it out yet?
  10. Arikado89

    New Astro City Joystick & buttons replacement

    I changed my astro sticks and buttons recently. The LS32 stick you posted would works just fine, if you swapped the plate with the stock one. Otherwise the shaft would be too short. I ordered this one for my astro: https://arcadeshock.com/products/seimitsu-ls-32-01-joystick For the buttons...
  11. Arikado89

    Super neo 29 monitor image wobble issue.

    always trust your instincts @BumbleChump ;)
  12. Arikado89

    Super neo 29 monitor image wobble issue.

    IKR! Especially after the nightmares i went through dealing with 2931 and 2933, this one is a breeze to deal with.
  13. Arikado89

    Super neo 29 monitor image wobble issue.

    As you guessed it guys, the culprit was cold solder joints. It works fine now. No more earthquake 😁. https://imgur.com/a/4WH84XU Thanks again.
  14. Arikado89

    Super neo 29 monitor image wobble issue.

    Thanks for the all input. It's the original Hitachi gmk-29fs3. I'll take out the chassis later today and start diagnosing.
  15. Arikado89

    Super neo 29 monitor image wobble issue.

    Hello, One of my super neo 29 cabs started to have wobbly/ shaking image. I double checked the sync cable and monitor knobs in control panel but the problem persists. https://imgur.com/gallery/JW1dAV0 Thoughts?
  16. Arikado89

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    Great job @ShootTheCore ! The instructions are pretty straightforward(bookmarked). I just got an email that my mistercade has been shipped :thumbsup:. Can't Wait.
  17. Arikado89

    [Found]WTB: CPS2 empty shell.

    Hello, Looking for an empty CPS2 A+B shells (any region) in an acceptable state. Preferably located in the US, Europe or Australia. Thanks!
  18. Arikado89

    Irken (MiSTer) JAMMA Expander

    I desperately need two more :/. Hope the next batch won't take long @invzim.
  19. Arikado89

    All gone, thank you!

    PM sent for Rival school.
Top