Search results

  1. misteraddons

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    Glad we got it taken care of and thanks for posting the solution :)
  2. misteraddons

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    I've found that 270 ohm series resistors on the R, G, and B lines and 680-750 ohm series resistor on the H-sync line output 0.7V RGB and -0.3V Csync on a 75 ohm display. I may spin up a few standalone adapters to make life easy :)
  3. misteraddons

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    All 3 colors have the same circuit and output levels. Make sure you have ypbpr=0 in MiSTer.ini. Shoot me an email if that doesn't solve it.
  4. misteraddons

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    MiSTer changed the controller order logic in 2019 or 2020. Now, player number is assigned based on the order in which controllers are activated. So pressing a button on P1Joy will assign that device to P1. The next controller to press a button will be P2, etc.. This is true each time you load a...
  5. misteraddons

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    It's not very widespread and I'll make sure you're taken care of. Yeah the connection issue is intermittent on the affected units. Once it connects it maintains its connection until you power off or reset.
  6. misteraddons

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    Please use my site’s contact page for support. So far, the only solution has been to replace the microcontrollers with new ones.
  7. misteraddons

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    Hey, use the contact form on my site and I’ll help troubleshoot. A few microcontrollers have intermittent connection issues and need replacement. I caught most but not all of them during the QA process. Regarding the top and bottom plates, I have the bottom plates ordered + PCB feet. Waiting on...
  8. misteraddons

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    Are you using a PC CRT? If so you'll need external attenuation. Read some of the above posts.
  9. misteraddons

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    Yes, you can power via DE10-nano for now - 12V is only used for the audio amp and to generate 5V.
  10. misteraddons

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    M MiSTercade outputs ~3.3V RGB which is nearly identical to NeoGeo MV1C, so I'm not entirely sure why it would look washed out by comparison.
  11. misteraddons

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    Awesome, glad you're up and running :)
  12. misteraddons

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    Interesting! The 5V line is only loaded to draw 50mA. Either way glad you solved the problem!
  13. misteraddons

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    Look at the rom extension from the load prompt. Probably incorrect file extension.
  14. misteraddons

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    Excellent, thanks for following up. Like Aurich said, the NeoGeo cabinets should have an adapter for JAMMA since they use stereo audio and JAMMA is mono. Can you tell me which JAMMA pin the “select” button is wired to? If it’s MVS wiring then looks like it should be: “Select Up” = P1B5 and...
  15. misteraddons

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    Updated to MiSTer.ini in the manual. I always use MiSTer.ini but idk if it's case sensitive. Can you confirm that your "MiSTer.ini" has composite_sync=1? Also, make sure your SD card is properly setup. The only other time I've seen issues with no sync was when the linux image wasn't properly...
  16. misteraddons

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    Sorry, not sure how that was missed but I can ship one to you if needed. Just shoot me an email using my site's contact page :) The video output levels are between 3V and 3.3V - just slightly less than the Neo-Geo MV1C. I haven't seen any reports of power supply issues (other than Aurich's) but...
  17. misteraddons

    Coin Error after (bad?) BIOS flash

    Yeah I checked and on multiple cabinets :(
Top