Search results

  1. sarty51

    Ms2930 picture looks awful YUCK! 🤢 🤮halp!

    Switch 1 and 3 should be off on your remote board for 15khz. It looks like they are all up in the video
  2. sarty51

    Ms2930 picture looks awful YUCK! 🤢 🤮halp!

    When you adjust that screen pot I usually set my brightness pot to about the halfway mark on the remote board. That way you have some play. If your red is still to strong after dialing down the gain pot. You may want to check the big white resistor for that gun on your neck board as well. Also...
  3. sarty51

    Ms2930 picture looks awful YUCK! 🤢 🤮halp!

    Yea like the guy stated below you need a 2930 remote board. You have a 2931. 2931 will automatically select between 15,24, and 31. Your monitor doesn’t know what mode it’s in. I wouldn’t bother with any pots or anything till you get the 2930 remote board.
  4. sarty51

    Ms2930 picture looks awful YUCK! 🤢 🤮halp!

    Just curious. The remote board extension cable. If you wiggle the connector at the extension point will the picture come in and out? Mine has that issue. Sync will go in and out.
  5. sarty51

    Harnesses and other adapters by Lemony Vengeance

    Hey lemony! You wouldn’t by chance have the materials available to make me a new MS-2930 remote board cable would you?
  6. sarty51

    WTB Nanao MS9 29 Monitor

    This is true. My bad for the misleading statement.
  7. sarty51

    MS2930/31 Deflection Yoke Question

    Awesome thank you guys for the confirmation on that.
  8. sarty51

    MS2930/31 Deflection Yoke Question

    Can I pair a MS-2931 deflection yoke with a MS-2930 chassis and 2930 tube? The values appear to be close that I found. I did not know if I would be in danger of damaging anything on my 2930 with this swap. Or would I need to modify anything on my chassis for this swap? Thanks!
  9. sarty51

    WTB: Nanao MS-2930 Deflection Yoke (Found)

    We’re you able to get that yoke? Thanks.
  10. sarty51

    WTB: Nanao MS-2930 Deflection Yoke (Found)

    Yes, that works. Would you be able to knock a couple bucks off since there won’t be any eBay fees. When you get some time send me a PM with your PayPal details and that. Thanks
  11. sarty51

    WTB: Nanao MS-2930 Deflection Yoke (Found)

    Did you find one? I messaged you back. I’ll take it if you do have it. Thanks.
  12. sarty51

    WTB Nanao MS9 29 Monitor

    Oh yea and you will need a 2930/31 frame to swap the monitor over to.
  13. sarty51

    WTB Nanao MS9 29 Monitor

    A MS-9 will fit in a Blast City. The issue is the bezel. You have to kind of back mount the monitor to the frame and use some washers. This helps the monitor sit deeper into the cab. The bezel will then pop into place. Other than that yea the MS-9 tube has much more curvature to it than the...
  14. sarty51

    Dreamcast - Naomi Capcom Panel Official Interest Check

    If not too late I am most definitely interested in one of these panels. I have been looking for one for a long time. Thanks.
  15. sarty51

    WTB: Nanao MS-2930 Deflection Yoke (Found)

    I am looking for a good working Nanao MS-2930 deflection yoke. Thanks!
Top