Search results

  1. hardyhell

    Sega Naomi NetBoot Games List Working/Not Working/Untested/Missing

    Does anyone know if any virtua fighter 4 is working with pi NetBoot? Thanks
  2. hardyhell

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    Found the right ip settings now. Seem to have changed since the last image I had. Thanks to you all.
  3. hardyhell

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    This one worked to unpack. Thank you very much. Only problem now is that he can not find my naomi2 netdimm anymore.
  4. hardyhell

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    did all new install of 7zip uninstalled wirar before. reboots and so on re downloaded all the stuff again. this time with chrome browser. unpack errors out at about 27 gig processed. could someone please do me a favour and put the unpacked image somewhere for me to grab?
  5. hardyhell

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    crc32 : 9be40988 MD5: 69ca85781b8245753c8d89c437211ce3 SHA-1:cd1e332cf18ddf92856c7d2c4a60beb855a5be3e
  6. hardyhell

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    shit fuck. it is just not working. downloaded all the files once again.tried to unpack with 7zip and again data error in the middle of the process
  7. hardyhell

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    ok now it extracted the files complete but its no iso or image file. just a no extension file. 7zip said it is no good after extracting but gave me a image file of about 13gig.lets see if it works after flashing it to the sd
  8. hardyhell

    Yoke and tube specs for monitors

    it is a hell of work to get the picture right then? with the yoke added to another tube? did that with a naomi monitor one time. never got it back good :(
  9. hardyhell

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    i used winrar. filenames are WiPi6.7z.009 and so on. removed the .7z now and give it a try. next would be to try and get 7zip installed. thanks for all the help so far.
  10. hardyhell

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    file by file and all together tested
  11. hardyhell

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    could anyone please help me out with the image? it is just broken every time @chunksin do you perhaps have an idea how to fix this?
  12. hardyhell

    Yoke and tube specs for monitors

    Thanks for your explanation. I will better look for these Philips tubes then. Have some other TVs I will check the values tomorrow.
  13. hardyhell

    Yoke and tube specs for monitors

    Oh great. I will hunt for the black line then. Never thought that these 100hz TV sets could be any good for this ms9. Thanks. If I use the ms9 on the toshiba i have here will it damage the tv or the ms9?
  14. hardyhell

    Yoke and tube specs for monitors

    So basically I just need to find a tv with a coil that has the right inductance. I thought that this toshiba tv which is hard to come by here in Germany would be good because it’s the right brand. Well then it’s basically all about the coils and the right neck board connector. Does anyone else...
  15. hardyhell

    Yoke and tube specs for monitors

    Chassis/Monitor Lh (mH) Lv (mH) Rh (ohm) Rv (ohm Nanao MS9-29 0.33 14.00 The list here says this for Nanao ms9 So I guess my lh and lv on this yoke is to high. Will not work then? Did not find the resistance for the ms9 in the list there
  16. hardyhell

    Yoke and tube specs for monitors

    Unplugged it and tested all combinations. Red / blue gave me 2ohm and L=1.32mH Green/yellow 6.6ohm and L=18.7mH Used the Bside ESR02Pro
  17. hardyhell

    Yoke and tube specs for monitors

    Thanks. So I unplug the yoke and measure wich pairs? I see 4 values in these lists. Lh lv rh rv how can I find out which is the right one? Thanks.
  18. hardyhell

    Yoke and tube specs for monitors

    Boys. I have some questions. Have a consumer toshiba tv here. Tube is A68KLF96X02 On the yoke it says TY-29KC4A A 4A0(or8)6A Would like to pair it with a nanao ms9 chassis. What and how exactly do I have to measure the yoke of this tube? Thanks
Top