Search results

only you can use USA/Asia/Japan games no pall because of the 50hz. Also games with extension pack ar no problem for the aleck as it has it build in the system. So the only need is to make a n64 pinout adapter to a aleck card pinout . Something I made in the original topic . I just don’t have the...

I swapped a rom straight from the card to a socketed original aleck card and it works , only you can use USA/Asia/Japan games no pall because of the 50hz. Also games with extension pack ar no problem for the aleck as it has it build in the system. Only thing to watch is that some cards use a...

Should be doable :) I have the stl file ready for you for the casing if needed . @twistedsymphony , For other info, You can hook your n64 controller direct to the aleck if you take a n64 cable extender and cut of 1 end and connect it to the 3 wire plug on the system .

Nope no pcb design in here I think that already was open and shared in the other topic . There is not security issue on a aleck it’s all open . So the only thing in there was a stl that you don’t need. So no need for any of this for you :-)

I have much time invested in the stl file as it was a pain to get it right . So if the whole stuff gets sold as a set and that person don’t give a shizzle about the files I will upload it to be used free, I want someone to finish it that’s wy I’m offering it as a set as maybe that person want...

Up for sale is the following project I wanted to finish but don’t have the time on hands so I hope someone will release this in the future Brand new controll panel with analoge and digital pcb/sticks switch version original Nintendo/aleck 2x new condition aleck 64 motherboard 1x original...

Hello members due to to much work at hand I’m am selling my boards and all related to this project. I hope someone else will finish these and or put in production . I will post it in the for sale section and in that sale I will include the stl files for the card

All regions should work . But some games have a larger rom so need to check that. But this projects is still on hold . I was waiting on some new pcb s as the old ones where not right but with Chinese newyear and other issues this just takes so long

That’s a video ram issue on the board. Know issue on gaelco. Due to bad cooling. Maybe some reflow can help. It’s the mid board under the right rom board

you only can swap out games that have the same stacking number Model 2 has A,B,C so A only fits A etc Same on model 3 step 1,1.5,2.0/2.1

Sold!

Sold!

@djsheep thx bro :-) Hmm I collect a lot of shizzle from the Dreamcast dev , but this sdk it total useless in my eyes it’s not like it contained a new unreleased game .

@ChrisBEANS you are verry welcome! Hope you enjoy your game :-) and always happy to be of service . Thank you for your purchase and go beat that game please as I couldn’t haha Be safe!

Welcome ! You feel right at home here :-)

SOLD!

HOLD for @Danmaku pending payment

Yes this is getting a bit swarmed? Ap name change to Ali maybe . You know y’all want those bootlegs :D[astrocity]

New pictures added

THIS^