Search results

  1. PASTBLASTER

    WTB: Mushihimesama PCB

    Looking for a Mushihimesama PCB. Anyone looking to sell one?
  2. PASTBLASTER

    Another Blast City Project (Bass Fishing Conversion)

    Gratz on the pickup! Every one of my Blasts has started it's life as a Bass Fishing. Have fun on the conversion! I'll be watching :)
  3. PASTBLASTER

    R-TYPE - Ram Errors

    Ok, in speaking with a local friend, he helped me determine they are 27256 chips. Using that, I was able to complete ROMIDENT all of the chips, and everything checks out. I have some IC grabbers on their way, so when they arrive I'll start scoping all of the rams on the middle board. Will...
  4. PASTBLASTER

    R-TYPE - Ram Errors

    Working on rom-ident all of the game roms. My roms located at J01, L11, L31, and J21 have no visible Silkscreen. Do you happen to know which type of chip these 4 are? In the MAME rom, they look to be smaller than the other M5L27512.
  5. PASTBLASTER

    R-TYPE - Ram Errors

    What a legend. Thank you so much! I will use this and start the journey on getting this going again! Will post my findings as I go.
  6. PASTBLASTER

    R-TYPE - Ram Errors

    Looks like I will be busting out the probe this weekend and testing all of the rams I can identify (I suspect the faulty ram is in the row under the C board). Will report back if I find anything.
  7. PASTBLASTER

    Let's Connect a PC to an Arcade Cab, Shall we??!!

    I actually had the right one, for whatever reason, a third restart got it to see the onboard card. Seems to be working ok now! Now onto getting the thumb drive setup thing going. TY again for documenting this for everyone!
  8. PASTBLASTER

    Let's Connect a PC to an Arcade Cab, Shall we??!!

    Using the same PC as OP, I was able to install the CRT Emu Driver. When I run VMMaker, it says it cannot see any compatible devices...... (On board HD 7480D) I verified the driver is installed (Calamity), but it only sees \\.\DISPLAY1 No compatible driver found Kind of stuck here since I...
  9. PASTBLASTER

    R-TYPE - Ram Errors

    I recently acquired an untested M72 R-Type, Untested. After removing everything and cleaning and reseating, the board boots to "Ram Error 3" Looking in the manual, I see that error relates to the "V-RAM A (Word Check)" Can anyone point me in the right direction on WHERE that chip is on the...
  10. PASTBLASTER

    WTB: MS9 Yoke Flip Switch

    Thanks for this! I agree, these switches look kind of low end. I like the design of Emphatics harness, so I may just try to build something. I'd like to find a build guide so I make sure it's wired up properly.
  11. PASTBLASTER

    WTB: MS9 Yoke Flip Switch

    I've checked YAJ and can't seem to find any. Anyone have a link to one, or a Tutorial?
  12. PASTBLASTER

    Let's Connect a PC to an Arcade Cab, Shall we??!!

    Following and Building along with this thread. Always wanted a solid mini mame PC setup I could chuck in a cab. Thanks for doing this!
  13. PASTBLASTER

    WTB: MS9 Yoke Flip Switch

    Have a link?
  14. PASTBLASTER

    WTB: MS9 Yoke Flip Switch

    I've never messed with them before and would rather see one built before making my own. Hopefully someone has one laying around I can snag.
  15. PASTBLASTER

    WTB: MS9 Yoke Flip Switch

    Anyone make these any longer? I have a few pesky boards that don't have flip screen dips. Lemme know!
  16. PASTBLASTER

    MP07-IONA-US JVS/USB I/O Board: Worldwide Sales & Troubleshooting Thread

    Anyone having any luck on RE2? I'm using a V2 board, with Brook UFB and not getting anything. I get the flashing LED, then solid once the board is booted, but nothing I do gets any inputs working. I've tried reading down the instructions, but no luck thus far. Any suggestions?
  17. PASTBLASTER

    Xed and Mirko repro Monkeyball banana and harness

    Started filming for a YouTube video on these parts. Hoping to have it up by the end of the week.
  18. PASTBLASTER

    (New) Astro City Cashbox Shelf

    Cut one for my Astro this weekend with a Jigsaw. Works perfectly! Thanks for designing this!
  19. PASTBLASTER

    Working on a Sega Blast City

    One of the nicest Blast restore threads I've seen. Awesome work!
Top