Search results

  1. kardus

    FS: DARKSOFT CPS2 Multi Kit

    USD unfortunately. It is also being shipped from the US
  2. kardus

    FS: DARKSOFT CPS2 Multi Kit

    Original. Lowered price to $410
  3. kardus

    FS: DARKSOFT CPS2 Multi Kit

    New/unused (opened) DARKSOFT CPS2 Multi Kit for sale. Shipped from the US $410 or best offer
  4. kardus

    where is a good place to buy a replacement volume pot for a cps3 board? also what is the correct part number?

    Does anyone have any extra that would be willing to send me one?
  5. kardus

    Home Arcade System

    @RGB have you used this with the OSSC yet?
  6. kardus

    Home Arcade System

    Completed, excited for this! If anyone wants to buy an old one let me know :P
  7. kardus

    Which CPS2 games are already pre-jumpered for the multikit?

    Are there usually any markings or stickers on the outside of B boards letting people know if it was a later revision or had work done on it? I'm buying from someone locally and those are my choices I listed above. Soldering really isn't a problem for me, I just figured I would be better off...
  8. kardus

    Which CPS2 games are already pre-jumpered for the multikit?

    Any clue if any of these are? Darkstalkers : night warriors Xmen vs. Street Fighter Street Fighter Alpha 2 X-men: Children of the Atom Marvel Super Heroes
  9. kardus

    Which CPS2 games are already pre-jumpered for the multikit?

    Thinking of picking up another (preferably suicided) CPS2 B board for my multikit I have laying around. Does anyone have any idea what boards already come with the correct jumper/bodge wiring setup for the multikit? I believe last time I had an Alpha 3 board which was already setup properly. I'm...
  10. kardus

    [Canada] Looking for a CPS2 B-board

    Looking for a B board so I can finally get around to using my multi kit. Suicided boards are fine so long as they are in working order.
  11. kardus

    Home Arcade System

    Are the boards confirmed working on other monitors/superguns? Either way, you're going to absolutely need the terminators for any BVM, so your best bet is to wait for those before doing anything else. You could test the gamecube on it with RCA -> BNC adapters which cost only a few cents each...
  12. kardus

    Home Arcade System

    Search "75 ohm BNC terminator" on ebay..usually you can find a couple or lot there cheaper than most cable specialty stores if you are having trouble finding them. If you order from China be prepared to wait a few months, so try ordering domestically or within the same continent.
  13. kardus

    Home Arcade System

    For BVM's you MUST have the 75 Ω terminators on all inputs or the picture will look too bright and you'll possibly see other issues. With PVM's typically you typically do not need termination. Of course make sure your HAS is ideally getting 5.00-5.04v. I still don't have too much experience...
  14. kardus

    Home Arcade System

    - Encoders would be a treat (component and/or s-video + component), but maybe out of the vision of your simple design - On board separate sync (EL1338 ?) - If the board is ever made larger to accomodate more features, maybe hardwired BNC/RCA outs - change the orientation of volume pot so it can...
  15. kardus

    64 & 128Mb CPS3 Repro SIMMS!!

    If he just wants to play 3rd strike, isn't it possible to use his security cart with a modified 2i->3s ISO? (so long as he has the required SIMMs)
  16. kardus

    Supergun in a PC case

    You'll need an audio attenuation circuit if you want to use the Jamma audio. If you want to use it from the RCA outs on the CPS3, I believe you'll need some kind of amplification although I'm not sure what's appropriate. You might be able to find a fairly cheap amp/pre-amp small enough for...
  17. kardus

    Consolised CPS3 Project

    Two short clips of the CPS3 in action :) I'm ordering the remaining parts I need for the new supergun tomorrow and will hopefully post an update when that's done. I'm still looking for an appropriate case- does anyone know any companies that do enclosures? Steel or preferably aluminum is fine.
  18. kardus

    Consolised CPS3 Project

    I recently obtained a CPS3 and got a converted SuperBIOS cart which I'm loving so far. I'm using it with a SCSI2SD, HAS supergun with it and the custom plexi: Although it is a great setup, I find myself looking for something more streamlined as the setup will be moved a lot. So, I'm going...
  19. kardus

    Game install menu cannot install game?

    Hmm..seems to be working now after a reflash. Disregard
Top