Search results

Is your build wooden? Any reason to not use the Kraylix / DMyers plans?

yep, they'll fit

I don't use coins with my cab, and don't want people trying to put coins into the coin slot, so I scaled this ash tray to my blender bottle and printed it. I fed some screws up from the inside of the vewlix CP, silver-sharpied the screw tips, and used that to know where to drill on the...

Made a quick one of these; I'm probably going to print it at ~80mm in width to serve as a cupholder. CAD file and STL's attached, used View: https://www.youtube.com/watch?v=6HbXfpt0Y7o as a guide to wrap the Taito SVG. Source CAD file was https://grabcad.com/library/ashtray-72

Somebody on this reddit thread was doing something similar, and linked this post as their starting point

As someone else who's done basically all of these mods as well, agreed this is a great deal. If somebody out there really wants a Vewlix but has a strict low budget in mind, please reconsider said budget! You'll be doing yourself a favor. With the time you save, run a lemonade stand or something.

considered that too, but didn't want to warranty void for it. It's not so bad with the newer brackets with the cutout.

I had to do this on mine too; HA said it's to be expected. I did place a felt pad there to ease the strain a little IIRC.

Is it possible to reverse engineer the schematic if you have an IO board? I don't have an IO in my cab.

Get one 3D printed/modeled?

Some helpful info would be: 1p/2p panel, populated, monitor resolution, etc?

Infill isn't as important as number of walls/perimeters. I printed mine at around 35% probably but with 4 perimeters. I haven't tried holding a monitor up with just the mounts, though.

Happy to send my Vewlix L 1P panel to a good home. @MmSadda was a pleasure to work with; prompt payment and extremely reasonable about shipping expectations.

I think it's worth a shot!

I designed this part to hold my LG 32GK850F-B (very) flush against the new glass I bought. If you print them with a sturdy material (PETG, Nylon, ABS, etc) they *might* be sufficient to hold your monitor without any other brackets. @albert240p had some printed and seemed happy with them...

Welcome! I think https://www.arcade-projects.com/threads/sega-astro-city-restored.18550/ is the gold standard for an Astro restoration, hopefully you've found that thread by now.

What are you running in your cab, and how do you turn your cab on? I've got my cab on a smart power strip with a PC, and the PC power is what triggers the whole smart power strip.

For what kind of game? Also, compared to what?

Cab looks beautiful!