Search results

  1. kingcar

    MiSTer FPGA

    neat! looking forward to this. Are there any info's out there if it also has build in Ram like the MultiSystem from RMC?
  2. kingcar

    Axun Workshop - JAMMA Extractor (JAMMA Capture/Streaming Adapter)

    That's pretty neat. Ilike that there are RGB Adjust for both cabinets now.
  3. kingcar

    IGS PGM + RetroTINK 5X Screen curl?

    Happened occasionally with atomiswave when I used to stream. My "hotfix" was just switch the input an then go back so it resyncs the signal. A permanent fix would be much appreciated. I didn't want to mess with the settings too deep yet, was a bit concered to damage the hardware.
  4. kingcar

    NAC Splitfire: JAMMA streaming solution

    The easiest I found was to have the retrotink 5x since it outputs 1080p. And all the capture cards these days accept this resolution.
  5. kingcar

    NAC Splitfire: JAMMA streaming solution

    Back then my setup was: OSSC-> Aver Media Capture Card OSSC Setting was x2 or 3
  6. kingcar

    NAC Splitfire: JAMMA streaming solution

    it really depens on the hardware you are trying to capture. Most stuff for me worked at x3 which on the most stuff would be 720p. Try that one.
  7. kingcar

    Positive feedback for XeD

    Excellent seller!
  8. kingcar

    FS: DE10 nano (Sold out. Thank you everyone)

    Submitted for 1 Device.
  9. kingcar

    NAC Splitfire: JAMMA streaming solution

    If you have an OSSC you can just use a ordinary VGA Cable. But In my setup I don't want to use it so I would need one too. :D Any clues guys???
  10. kingcar

    NAC Splitfire: JAMMA streaming solution

    Got mine Today. I don't know when I can test, but I'll put on a video when I'm done. :D
  11. kingcar

    NAC Splitfire: JAMMA streaming solution

    YES! finally! just ordered. :D
  12. kingcar

    NAC Splitfire: JAMMA streaming solution

    Yes!:thumbsup:
  13. kingcar

    NAC Splitfire: JAMMA streaming solution

    From what the product desciption says: Yes but let's hear it from the man himself @Hatsune Mike :D
  14. kingcar

    Irken (MiSTer) JAMMA Expander

    I'm in for one too.:thumbup:
  15. kingcar

    Axun Workshop - JAMMA Extractor (JAMMA Capture/Streaming Adapter)

    I actually don't have any clue. Any other board I tested was fine. But Atomiswave already gave an unclean image on ossc with the axun board. I happen to have also a Hydra scart switch and this device, cleans up the signal. But I think that there has to be a solution to it, without chaining any...
  16. kingcar

    Axun Workshop - JAMMA Extractor (JAMMA Capture/Streaming Adapter)

    And here it is @Axun @axunworks View: https://www.youtube.com/watch?v=3MY-tFn-PV0&ab_channel=Kingcar
  17. kingcar

    Axun Workshop - JAMMA Extractor (JAMMA Capture/Streaming Adapter)

    A little update on my side. I just got the Retrotink 5x and I was eager to test ist with the Jamma Extractor. 15Khz looks fabulous on cps 2 and 3 but the atomiswave gives me some heavy janky artifacts/wobbling on 15 and 31khz, all over an unbearable image imo. I will post a video of it later in...
  18. kingcar

    (Sold) Mister FPGA 128 MB

    i'll take it
  19. kingcar

    Hello from Berlin

    Willkommen. :D
  20. kingcar

    Neo geo Kizuna Encounter 4p board

    Very nice! Would be down for one of these.
Top