Search results

  1. M

    Selling everything! Inquire within!

    Just letting you know that the forum rules state you can't sell a darksoft multi on this forum. in case your ad gets taken down.
  2. M

    Namco 'CUS27' reproduction

    Well done on the new reproduction. Great job. Does your findings help improve the mame emulation/mister implementation?
  3. M

    CPS1 Multi - Support thread

    Seller sheep_nova sells the compatible c boards on eBay for $30. Then you would need to find a short A board...........
  4. M

    CPS1 Multi - Support thread

    I bought one of these A boards cheap and put world warrior B+C on it. It works fine. The original world warrior A board is mint and in the multi works perfect with it. No way I'd put the beautiful multi with that rough looking hacked A board. Where did these hacked A boards come from and why is...
  5. M

    CPS1 Multi. Official Thread

    If putting it in a case surely the case will need a fan system like cps2? Has anyone put a fan/heatsink over the CPS-A-01 custom?
  6. M

    CPS1 Multi. Official Thread

    Has anyone tried ordering q sound from here I'm actually quite annoyed. I only pre ordered back in February as it was supposedly a "lottery" on the q sound and worth the gamble. I appreciate the...
  7. M

    Let's Connect a PC to an Arcade Cab, Shall we??!!

    If you going all in with additional arcade emulators like supermodel, m2, teknoparrot, demul then autohotkey can be used to set key combinations like "hold start for 5 seconds and press p1 button1 for the nominated credit button" or "hold start for 5 seconds and press p1 b1,b2,b3 for the...
  8. M

    Let's Connect a PC to an Arcade Cab, Shall we??!!

    You could Install autohotkey and set a custom button combination to trigger insert coin.
  9. M

    CPS1 Multi. Official Thread

    No worries. Can I purchase the pcb separately without the qsound chip and install a qsound myself?
  10. M

    CPS1 Multi. Official Thread

    I'm likely to get an fpga as i just received shipping notice from saveyourgames. Can I diy desolder the fpga with hot air and install qsound as I've several cps2 boards?
  11. M

    How to dump 1mbit mask roms from a konami 80's pcb

    Would anyone have any experience in dumping 1m mask roms from a konami pcb? Can you advise on what chip type to select or if I need a special socket? I've tried a few methods and each time the dump doesnt match mame. It's the 4x mask roms on a konami jackal pcb. The game is booting but the...
  12. M

    MS8-29 - MS9-29 Swap

    Can the 31k hack for ms9 chassis be done on the ms8 chassis?
  13. M

    'The Thing' - a FM Towns Marty FDD emulator

    Hello Caius. Great work here and also I enjoy watching your short repair videos on youtube. You posed a lot yesterday! Would you consider enabling comments on your videos as it would be great to be able to read.
  14. M

    CPS1 Multi. Official Thread

    I was only half joking. (You can't post links to roms which is understandable but it drives me nuts that everywhere is allowing the posting of links to the mister update_all script which is just the same.....) Got the files on archive and sd card is ready :thumbup:
  15. M

    CPS1 Multi. Official Thread

    Links to roms are not allowed but perhaps could someone link to a script that downloads the rom pack the same as misters "update_all" script? Everywhere allows posting links to the update all script.
  16. M

    Hakko FR-301 Desoldering Gun review

    IMHO the key is the size of the nozzle. I had a Pro'skit SS-331H and it wasn't great as the smallest nozzle was 1.0mm. That's too big and would easily damage the pcb around the pin. I swapped to a SP-1010DR (ZD-915) and bought a compatible 0.8mm nozzle. It is a dream! 1. Spend the extra 2...
  17. M

    PAL/GAL for bubble bobble single pcb bootleg pcb repair

    I've a bobble bobble bootleg single pcb here. It doesn't look like any other PCB I've found online but the socketable roms dump as Supper Bobble Bobble set 1 It's not booting to game but I hear a brief chime at power up. Also dipA 3 (test mode) gives the crosshatch, ram test and input test all...
  18. M


    Received cps1 A board last week. Shipping to europe takes approx 2 months.
  19. M

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    Does anyone know if the chunksin image has region patching built in? If not, is there a downloadable print out of region locked games that require the region dip switch changes when using multi bios?
  20. M

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    I agree thank you to everyone involved and for chunksin for putting it all together into an idiot proof image :) Does anyone know if the ram test was fixed in mathieulh's new bios? The old multi bios ram test was useless always hanging in ic9 when it was another random ram chip at fault.