Search results

  1. K

    Capcom "Forgotten Worlds' Spinner Repro by Hursit Official Interest Check Poll

    Thanks for the update, I have an original dedicated cabinet. If you need any pictures or if I can help in any way just let me know. And I hope all is well with you and your family @Derick2k Take care all!!!
  2. K

    Capcom "Forgotten Worlds' Spinner Repro by Hursit Official Interest Check Poll

    Any update on shipping these? It seems you were so close and just needed some testing confirmation in your last post!!!
  3. K

    Positive Feedback for GoldenGlover

    Absolutely perfect transaction. A great guy to meet and deal with. Thanks!!!
  4. K

    Spinner Joystick Pre-Order

    Any progress on getting these tested for shipping?
  5. K

    CPS1 Multi - Support thread

    I had the same problem and when I changed the A board it fixed it. even though the bad A board worked fine with its original B+C set.
  6. K

    Spinner Joystick Pre-Order

    Amen to that brother!!!! This is the icing on the multi cps1 cake. Thanks Hursit!!!!!
  7. K

    General talk about CPS1.5 Multi Addons

    I'd like 1 spinner pcb, and 1 remote dip switch pcb w/3 foot cable.
  8. K

    CPS1 Multi - Support thread

    Yes please, I need 1 and a spinner board!!
  9. K

    CPS1 Multi. Official Thread

    Will we have to desolder the original dip switches and solder in the wires for the extension cable?
  10. K

    CPS1 Multi - Support thread

    Just switched the A board and it appears that's what the problem was. It's the same A board type, just a spare I had. Not sure how I missed the previous post about switching A boards, I've been keeping up with very thing posted. Thanks for the help, and for the record, my sf2 koryu isn't working...
  11. K

    CPS1 Multi - Support thread

    I have another "A" board I can try, the voltage is at 5.09v. Should I put it at exactly 5.0?
  12. K

    CPS1 Multi - Support thread

    Yeah, Jamma edge only. I have tried the original release pack and the USA pack. I haven't tried changing the dip switches other than the recommended setting, I figured I'd wait until someone else had the same problem and see what came out of it.
  13. K

    CPS1 Multi - Support thread

    I'm still having sound issues with all the sf2 games mostly. It seems to be better if I load the game, then cycle my cabinet off/on. But even then my sound issues are abut 50/50.
  14. K

    CPS1 Multi - Support thread

    I know this may be stupid, but on my card, #74 is megaman. Probably nothing, but just wanted to mention it.
  15. K

    CPS1 Multi - Support thread

    Ok, I'm using an 89626A-4 "A"board 12Mhz 92641C-1 "C" board dips are now set to 00000000 11000000 00000110 Ffight now seems to work fine, strider seems fine also, sf2ce and sf2hfu are better, but i still lose background music on Blanka's stage (on both games), I didn't complete the game so i...
  16. K

    CPS1 Multi - Support thread

    I'm having alot of sound issues as well. To name a few, the ffight, strider, sf2hfu, and sf2ce files all load and work for me, but the music will just stop and start a little later if I keep playing the game. All my dips are set to off, do we have to change them every time we switch games? Thanks
  17. K

    CPS1 Multi - Support thread

    Ok, just a warning to anyone who opted for the longer LCD cable from HSS. I have had my multi set up and ready to go for days, but I couldn't get it to work. It was like it had no power except for 1 green led on the multi board, everything else was dead. It turned out to be a bad/loose crimp on...
  18. K

    CPS1 Multi. Official Thread

    Welp, just waiting patiently (not really, I'm sitting here sweating) for you know what. The B board slid into the A board like butter, I had to look at it and make sure there wasn't something wrong...lol The only noticeable thing is that the reset wire is perilously close to being too short...
  19. K

    CPS1 Multi. Official Thread

    Thank you, I though there was a video but I couldn't find it.
Top