Search results

  1. V

    ZN1 Bios <V2> board arrives!

    Ohh that sounds tricky, I haven't done anything like that before. I'll hang on for the bios board then.
  2. V

    ZN1 Bios <V2> board arrives!

    Thanks for the reply. Sounds good. I think the ZN-2's I've got are capcom and not Sony. Is it a difficult mod? If it's just swapping a surface-mount IC then I might be able to save a bit on postage :D
  3. V

    ZN1 Bios <V2> board arrives!

    Bloody amazing work. Is this available anywhere? I'd love to convert one of my EX2 boards to a much more useful TGM and skip the ebay tax.
  4. V

    NAC Splitfire: JAMMA streaming solution

    Is it too late to stick my name down for one of these?
  5. V

    Namco recoil flyback diode

    Ta! They look about right
  6. V

    Namco recoil flyback diode

    Anyone know of a good replacement for the flyback diode on namco recoil guns? Some of the ones I have at the moment are showing a short, but they have no markings to tell me what they're supposed to be.
  7. V

    A Freeware Taito TypeX Multigame

    Does this work with the IO boards in Konami Windy II's?
  8. V

    Sega Naomi Universal/NNC Volume pot replacement

    Lovely! Exactly what I was after. Thank you!
  9. V

    Sega Naomi Universal/NNC Volume pot replacement

    Hi, does anyone know what the value of the volume pot on the little button board of Naomi Universals/NNCs are supposed to be? Or does anyone know of a modern equivalent I can buy to replace it?
  10. V

    MS9-29 with a green grid?

    I ended up just swapping the neckboard with a known working neckboard and it's back to life! I did test Q311, Q312, Q313 and Q314 on one of those little multi-component testers and they all seemed fine.
  11. V

    MS9-29 with a green grid?

    I found a burned out 100ohm resistor in R316 (neckboard) and replaced it (and R306 for red and R326 for blue as well), only to be greeted by the lovely smell of it immediately burning out. Before it burned out the green lines on the screen had turned to white lines with a white haze. Edit...
  12. V

    MS9-29 with a green grid?

    I've got (a different) MS9-29 that is showing a slightly diagonal green grid in one direction with what look like faint retrace lines. I've recapped this board already and the output transistors seem fine. Is anyone able to tell me where I should investigate? Please ignore the bad adjustment. No...
  13. V

    MS9-29 Powers up but then HV shutdown

    Hi! I'm trying to resurrect a clean-but-not-working MS9-29. This is my first time doing chassis repair. The symptoms are: Powers up fine, B+ around 76v, but with no picture. I can feel HV on the screen 30~ secs later something clicks and B+ goes to 110v (input voltage) and steadily trickles...
  14. V

    Taito Type X 3 (TTX3) Owners Thread - Pics/Info/Stuff

    Thinking about picking one of these up with a multiboot, but... Can you stick this in a cab with a 2P panel? Do the games work with local 2P mode?
  15. V

    WOULD IT BE POSSIBLE TO ADD STREET FIGHTER CHAMPION EDITION M5 AND M7 HACKS ON DARKSOFTCPS2?

    At least you have good taste. m7 is certainly the best bust version of Rainbow Edition.
  16. V

    Crackly sound on a Real Bout 2 cart

    This turned out to be several dead (corroded) V ROMs in the end. Sadly unsalvagable :(
  17. V

    A Freeware Taito TypeX Multigame

    Finding a machine with an AGP slot might be the hardest part!
  18. V

    A Freeware Taito TypeX Multigame

    I was being an idiot last time! When I swapped over the Naomi with a TTX I unplugged the power supply that was also powering the IO board (I thought it was getting power over the JVS USB cable). Now sadly I'm getting a Japanese error message that roughly translates to "Could not get device...
  19. V

    ZN2 Conversion and CAT702 reproduction [Taito GNet / Capcom Sony ZN]

    Sick work! Better get some more ZN2 boards before the price goes up.
Top